Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Char cloth  (Read 2228 times)

Offline ridjrunr

  • TMA Forum Member
  • ***
  • Posts: 1261
  • Location: KS
Char cloth
« on: November 04, 2013, 09:13:40 PM »
When preparing to make char cloth, does it matter too much how,where or how many holes are punched in the tin?
HCH member
NRA member
Fluent in English and sarcasm
TMA Member #313
Expires 10/8/21

Offline greggholmes

  • TMA Forum Member
  • ***
  • Posts: 209
  • TMA Member: 675
Re: Char cloth
« Reply #1 on: November 04, 2013, 09:40:01 PM »
the fewer the better, you don't want to much oxygen let in. I do on on top and one on the bottom
Member #675
Skagit Muzzle loaders
Expires June16, 2017

Any arm save our mothers', that arm is Brown Bess!


Offline mario

  • TMA Forum Member
  • ***
  • Posts: 975
Re: Char cloth
« Reply #2 on: November 04, 2013, 11:42:01 PM »
The tin I use is fairly large (holds maybe 10oz by volume) and I have only one hole in the lid.

Touching on what Gregg said, let in too much oxygen and you have burned cloth rather than charred cloth.

Mario

Offline greggholmes

  • TMA Forum Member
  • ***
  • Posts: 209
  • TMA Member: 675
Re: Char cloth
« Reply #3 on: November 05, 2013, 12:44:27 AM »
I have 2 to help it char evenly, it may help it may not
Member #675
Skagit Muzzle loaders
Expires June16, 2017

Any arm save our mothers', that arm is Brown Bess!


Offline Bison Horn

  • TMA Contributing Member
  • ***
  • Posts: 700
  • Location: TX
Re: Char cloth
« Reply #4 on: November 05, 2013, 05:02:21 AM »
Dan you get down to Bulls rondy next month and we'll make  bunch. BH
Alan Wright

Texas Trappers and Fur Hunters Association Life Member, LTAHA,National Trappers Association Life Member,FTA,NRA,NAHC Life Member
Dallas Muzzleloading Gun Club
"No freeman shall ever be debarred the use of arms"  Thomas Jefferson
Texas Trappers and Hunters Assoc.

Offline prairie dog

  • TMA Contributing Member
  • ***
  • Posts: 798
  • TMA Member: Contributing Member #678
Re: Char cloth
« Reply #5 on: November 05, 2013, 08:34:38 AM »
I put one hole in a tin with a tight lid.  With an Altoids type tin you don't need a hole, the lid is loose enough to let the gas escape.
Steve Sells

Offline ridjrunr

  • TMA Forum Member
  • ***
  • Posts: 1261
  • Location: KS
Re: Char cloth
« Reply #6 on: November 05, 2013, 08:58:51 AM »
Thanks for the input guys!
HCH member
NRA member
Fluent in English and sarcasm
TMA Member #313
Expires 10/8/21

Offline Riley/MN

  • TMA Contributing Member
  • ***
  • Posts: 5100
  • TMA Member: Charter Member #20
  • Location: Montana
Re: Char cloth
« Reply #7 on: November 05, 2013, 10:30:58 AM »
my method is a little 1 pint, 1/2 pint -whatever size paint can. It is actually a window glazing can. I got one hole in the lid and a little piece of stick that fits in it while cooling.
~Riley
><>


TMA Charter Member #20


Support Traditional Muzzleloading - Join the TMA!

Offline Archer

  • TMA Forum Member
  • ***
  • Posts: 16
Re: Char cloth
« Reply #8 on: December 05, 2013, 01:21:12 PM »
I've found that you can make char from punk wood using this same method.

Offline Riley/MN

  • TMA Contributing Member
  • ***
  • Posts: 5100
  • TMA Member: Charter Member #20
  • Location: Montana
Re: Char cloth
« Reply #9 on: December 05, 2013, 02:33:35 PM »
Yup, you can char anything that is carbon-based....
~Riley
><>


TMA Charter Member #20


Support Traditional Muzzleloading - Join the TMA!

Offline Kermit

  • TMA Forum Member
  • ***
  • Posts: 421
  • TMA: 3/21/17 ~ 3/21/18
  • TMA Member: 393
Re: Char cloth
« Reply #10 on: March 27, 2014, 10:18:16 PM »
I've used the same pint paint-type can with one nail hole in the lid for about 35 years now. I think it originally held tea. I cut heavy 100% cotton cloth (like old jeans) in strips about an inch wide. Wad up a handful, stuff it in and close the lid tightly, and toss it in the coals of a dying fire. When the smoke/vapor is flowing from the hole in a good little stream, I set those gasses alight if they haven't done it on their own. As soon as the flame dies because all the gasses have been driven off, I remove it from the fire and don't open til the next morning. Never fails me.
"Anything worth doing is worth doing slowly."
Mae West

Member Number 393

Offline Le Loup

  • TMA Forum Member
  • ***
  • Posts: 38
    • http://woodsrunnersdiary.blogspot.com.au/
Re: Char cloth
« Reply #11 on: May 13, 2014, 03:52:46 AM »
I know this does not answer your question, but charred cloth was not traditionally used outside of the home, except in the case of onboard ship. The Gunners used to char cloth.
Cloth was never charred in a tin, it was charred directly in the fire. Woodsmen charred punkwood & various other plant fibres, directly in the fire. The tinderbox was used to smother the tinder after it was charred. The fire is actually made directly from the tinderbox, although it was not unknown to place tinder in a kindling bundle & strike sparks on it there.
I did search the FAQ, but could not see any info on posting videos, so please excuse me just posting the links. There are many videos on my channel regarding 18th century wilderness living & a variety of period fire lighting methods if you are interested.
Regards, Keith.
No Charcloth Flint & Steel Fire Lighting.
 Field Preparation Of Plant Tinder For Use With Flint & Steel By Charring.
Plant Tinders Part One.
Recognising/Identifying Punk Wood & More By Keith H. Burgess Part One.
Two roads diverged in a wood, and I took the one less travelled by,
 and that has made all the difference.
Robert Frost.

A Woodsrunner's Diary

Offline Le Loup

  • TMA Forum Member
  • ***
  • Posts: 38
    • http://woodsrunnersdiary.blogspot.com.au/
Re: Char cloth
« Reply #12 on: October 16, 2016, 11:56:21 PM »
Quote from: Le Loup
I know this does not answer your question, but charred cloth was not traditionally used outside of the home, except in the case of onboard ship. The Gunners used to char cloth.
Cloth was never charred in a tin, it was charred directly in the fire. Woodsmen charred punkwood & various other plant fibres, directly in the fire. The tinderbox was used to smother the tinder after it was charred. The fire is actually made directly from the tinderbox, although it was not unknown to place tinder in a kindling bundle & strike sparks on it there.
I did search the FAQ, but could not see any info on posting videos, so please excuse me just posting the links. There are many videos on my channel regarding 18th century wilderness living & a variety of period fire lighting methods if you are interested.
Regards, Keith.
[size=150][/size]
« Last Edit: October 17, 2016, 06:23:19 PM by Le Loup »
Two roads diverged in a wood, and I took the one less travelled by,
 and that has made all the difference.
Robert Frost.

A Woodsrunner's Diary

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4141
  • TMA: Charter Member #150
Re: Char cloth
« Reply #13 on: October 17, 2016, 02:25:23 PM »
Keith,
Great tutorials.  Thanks for posting the links.  I will be coming back to watch again soonly.
Again, thank you,
John
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline Le Loup

  • TMA Forum Member
  • ***
  • Posts: 38
    • http://woodsrunnersdiary.blogspot.com.au/
Re: Char cloth
« Reply #14 on: October 17, 2016, 06:24:41 PM »
Quote from: "bigsmoke"
Keith,
Great tutorials.  Thanks for posting the links.  I will be coming back to watch again soonly.
Again, thank you,
John

Thanks for the feedback John, much appreciated.
Regards, Keith.
Two roads diverged in a wood, and I took the one less travelled by,
 and that has made all the difference.
Robert Frost.

A Woodsrunner's Diary