Traditional Muzzleloading Association
Craftsmanship => Gun Building and Repair => Topic started by: butterchurn on June 23, 2008, 12:41:57 AM
-
I picked up some permalyn sealer and finish from Track just to try them out. By following the instructions my test wood came out super glossy. Like a mirror! Also hard as a rock, imervious to water. Were finishes like this seen or even common in the 18th century?
-
BC there is a finish discussion going on at the moment at the americanlongrifles.com bulletin board in the gunbuilding section, look under in the stock sealer post, some pros and cons for permalyn, its a free site, just have to get a user name, hope this helps, Beav
-
Thanks, Beav! I'll look it up.