Traditional Firearms > Caplock Long Guns

At long last, it's percussion

(1/5) > >>

Bigsmoke:
A few years ago, I purchased a T/C PA Hunter from Kees.  He had upgraded the rifle and I really liked what he did.  First and foremost, he had Bobby Hoyt rebore it to .54 caliber.  Then he updated the ignition system from the stock T/C flintlock to an L & R RPL flintlock.  And then, if that wasn't enough, he had Bobby Hoyt construct a 20 gauge barrel for the firearm.  Man, how could it get any better?  Than for some reason, he decided to sell the rifle  and without even consulting with the home treasurer, I said, "Yep, I'll take it."

I don't know how many times I have done this dance before, and over the years and the times I did it, it has cost me dearly.  But once again, I thought I would switch over to flintlock and be happy and satisfied with it.  And, this time, I have honestly tried to accept that's what I am going to shoot.  Well, sorry, but that just wasn't going to happen.  I tried, I honestly tried, but it just didn't work.

So, last year I ordered an L & R RPL percussion lock for the rifle and not wanting to rush a good thing, I fiddled around until the first of April to do the modifications.  It was going to be converted with a drum.  Not having a mill, or even a drill press anymore, I chose to have a gunsmith make the transition.  Trying to find a gunsmith that will work on a muzzleloader in central LaLaLand was a chore in itself.

Anyway, the rifle was finished yesterday and I picked it up last night.  I am pretty happy with the job and glad to have a percussion rifle to shoot.



And, while he was at it, I had the guy install the touch hole liner from the original barrel into the smoothbore barrel.



The good news there is it increased the diameter of the touchhole a good amount.

But, there is always some sort of problem that needs to be overcome.  The hammer of the T/C RPL percussion lock is offset about a quarter of an inch.  And that is not going to work all that well.


So, I am thinking: 

1) bend the hammer cold? 
2)  Heat the hammer and bend it hot? 
3)  Use you brain and pick up the phone.

I chose option 3 and called L & R.  I talked to Tim and he suggested using the hammer off of their Leman lock which doesn't have that offset.
The solution's in the mail.
Finally, I am going to get a chance to use up some of the RWS caps and genuine GOEX tin can powder I have been stockpiling.
John

The Miner '49er:
That's a nice looking rifle!    I like the looks, the history and the romance of the flintlock, and even the mechanical dance as the flint in the cock strikes the frizzen . . . but . . . I'm with you that my preference for shooting is the caplock. Additionally, it appeals to me because it is nearly at the pinnacle of muzzle loading evolution. To my thinking, the Williamson derringer system gets my vote for the best of the BP world as it could shoot both loose powder with ball, ignited by a cap, or those newfangled cartridges. I wonder if Williamson ever tried to adapt his lockwork to a small caliber rifle.

Hank in WV:
My eyesight isn't what it used to be, but is that a washer under the nipple?

Bigsmoke:

--- Quote from: Hank in WV on May 01, 2023, 05:39:19 PM ---My eyesight isn't what it used to be, but is that a washer under the nipple?

--- End quote ---

Nope.  But you made me look, anyway.

KDubs:
Me like  ;)
Kevin

Navigation

[0] Message Index

[#] Next page