Traditional Muzzleloading Association
Craftsmanship => Gun Building and Repair => Topic started by: gunmaker on November 02, 2014, 11:13:37 PM
-
Just got finished with this little 20 bore. Chambers delux lock, curly maple wood, Track of wolf 30" barrel, steel trim. 6-1/2 lb. Click to see it made....Take a look --or take a shot either way.....Tom
(http://i1283.photobucket.com/albums/a555/TomKnight43/Georges%2020%20bore/DSCN0629_zps670a9369.jpg) (http://http)
-
NICE!!!!!!!!!! :rt th
-
gunmaker,
:shake [/color]
-
Sweet!
-
Nice job, looks like a lot of work!
-
bout 50 hours, more or less.....Keeps me off the golf course....Works as I've never had to play "Chase the ball" Tom
-
Bueno!
-
Very nice! Is the barrel channel glass bedded? I've been considering doing that with my build to get a seemless fit.
-
Yes it is, Makes the gun stronger and able to take recoil...
-
Do you have to inlet the barrel channel deeper than normal to accommodate the glass bedding?
-
Yes it is a loose fit to start. I try to keep the top edge of forearm close to barrel so glas doesn't show. What your seeing is only about a 1/16" thick if that.