Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Trade Gun or Fowler?  (Read 1923 times)

Offline tg

  • TMA Forum Member
  • ***
  • Posts: 397
(No subject)
« Reply #15 on: February 27, 2009, 10:53:27 AM »
Some of the Fusil Fins made for NA chiefs or the French Fusil de Chasse Fin would be quite a bit better than the common trade gun of the same style/type. it is al about the fit of the gun .

"such as what the devil you are doing there in the first place."

Help!  I  have fallen in the briars and can't get out!

Online rollingb

  • TMA BoD
  • ****
  • Posts: 6952
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
(No subject)
« Reply #16 on: February 27, 2009, 02:35:32 PM »
Quote from: "russ t frizzen"
It's been my experience that the longer barreled smoothbores tend to throw tighter patterns. I like the fowlers because they have sweeter lines and better balance. I would not be overly concerned about the long barrels. They just aren't a problem in the woods. I think that people who have trouble with the long guns might be better off going around whatever sort of brush or thicket that's hanging them up. If you're struggling through bramble patches and such, you've got bigger problems to worry about than barrel length--such as what the devil you are doing there in the first place.

Quite often when hunting, you'll find yourself crossing places like creeks, thickets, brushy ravines, over-grown wash outs, blow-downs, and etc., just to get from "point A, to point B".  ;)
"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Offline mark davidson

  • TMA Forum Member
  • ***
  • Posts: 350
(No subject)
« Reply #17 on: February 27, 2009, 02:51:00 PM »
About a month back, I found myself in an awful thicket chasing a small  buck I had just shot. It was the first time I realized just how long and unhandy my 42" barreled flinter really was. It was hung on something constantly. For the first time, shorter really seemed like a good idea!  Also I often like to stalk or still hunt mid morning when I get bored sitting or too cold to sit any longer. I like to move through the thick stuff and doing so with the long barreled gun I have is doable but not efficient or fluid by any means. My next thumper will have less tube!

Offline Mitch

  • TMA Forum Member
  • ***
  • Posts: 665
(No subject)
« Reply #18 on: February 27, 2009, 03:49:23 PM »
as was said about barrel length-to each his own....I hunt some serious brush country here in SW Colorado and have hunted Arkansas/Texas,etc. and have never had a problem with a 42in barrel...I believe most of the "problems" folks have come from shooting "short" guns most of your life....longer barrels just appeal to my eye also...
Ride the high trail....never tuck your tail

TMA#211 renewal date 01AUG08

Offline Pinecone

  • TMA Forum Member
  • ***
  • Posts: 9
(No subject)
« Reply #19 on: February 27, 2009, 05:05:56 PM »
Thanks again for all of the comments.  Hey, Ron...good to see ya.  Great story about the Porkie and the melon gun!

Claudia
TMA Member # 414  Exoires 2/14/10

Offline pathfinder

  • TMA Forum Member
  • ***
  • Posts: 741
(No subject)
« Reply #20 on: February 27, 2009, 06:09:27 PM »
Good point Mr.Frizzen. I often wondered why folks get hung up in the brush. I've really seen no difference between the long and shorter barrels as far as accuracy goes in the field. I prefer the Northwest Trade gun with a 41" barrel. Seems to shoulder and point a little better for me than Tulle's or Fowler's,although you can go with more of a rifle style with a fowler if that's what you like. Go to some shoots and ask if you could try different one's if there are. Most guy's would love to help ya out.
NRA life member
NMLRA

Offline jasontn

  • TMA Forum Member
  • ***
  • Posts: 483
(No subject)
« Reply #21 on: February 28, 2009, 12:54:21 PM »
..
« Last Edit: March 05, 2009, 12:06:31 AM by jasontn »

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #22 on: February 28, 2009, 03:51:42 PM »
Those are interesting side plates where did you get them?  I've never seen one exactly like them before.
Sir Michael
Charter Member #132

Offline Pinecone

  • TMA Forum Member
  • ***
  • Posts: 9
(No subject)
« Reply #23 on: February 28, 2009, 04:15:09 PM »
Very nice piece, jasontn!  Thanks for posting your pics.
TMA Member # 414  Exoires 2/14/10

Offline jasontn

  • TMA Forum Member
  • ***
  • Posts: 483
(No subject)
« Reply #24 on: February 28, 2009, 06:06:22 PM »
..
« Last Edit: March 05, 2009, 12:05:34 AM by jasontn »

Offline tg

  • TMA Forum Member
  • ***
  • Posts: 397
(No subject)
« Reply #25 on: February 28, 2009, 07:07:17 PM »
Where did the parts set come from if I may ask, that side plate caught my eye as well.

Offline jasontn

  • TMA Forum Member
  • ***
  • Posts: 483
(No subject)
« Reply #26 on: February 28, 2009, 08:31:27 PM »
...
« Last Edit: March 05, 2009, 12:06:02 AM by jasontn »

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #27 on: February 28, 2009, 09:22:14 PM »
:hairy  :toast  :notworthy  :clap
Sir Michael
Charter Member #132

Offline tg

  • TMA Forum Member
  • ***
  • Posts: 397
(No subject)
« Reply #28 on: February 28, 2009, 09:34:21 PM »
Yeah, it turned out real nice.

Offline jasontn

  • TMA Forum Member
  • ***
  • Posts: 483
(No subject)
« Reply #29 on: February 28, 2009, 10:35:28 PM »
..
« Last Edit: March 05, 2009, 12:05:03 AM by jasontn »