Traditional Muzzleloading Association
Shooting Traditional Firearms and Weapons => General Interest => Topic started by: rickevans on May 09, 2022, 09:32:17 AM
-
Found this one on my pile of stuff to sort through....Trying to find out what size round ball it throws. Anyone have a reverse lookup on old Lee molds?
-
Rick, I'll bet Uncle Russ may be a big help with this! shoot him a pm! and if it's a .350 mold I'm your huckleberry!
-
Found a small pair of calipers...looks like a 545. Which i can use.
-
Found a small pair of calipers...looks like a 545. Which i can use.
Interesting. I would have expected it to measure 0.454" which can be used with the .44 revolvers IIRC.
~Kees~
-
Okay, I emailed Lee and this is the reply:
Jeri @ Lee Precision, Inc.
Staff - 05/26/2022 10:44 am
Hi Kees,
Thanks for reaching out! I did some looking into it. The 90454 has a diameter of .530
Let me know if I can assist you any further!
Thank You,
Jeri
Customer Service
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027
So now we know.
~Kees~
-
I don't know if this will help but---https://leeprecision.com/bullet-casting/black-powder-molds/round-ball-mold
doggoner
-
OK, so that problem is cured. But FYI, Track of the Wolf has about every round ball mould that Lee ever made listed in their on line catalog, including a lot that have been dropped from production.
In looking at the Lee website, it is kind of disheartening to see how many of their moulds are in a backorder situation. Which goes to explain why Track's catalog shows them as out of stock. I guess that is the new normal, eh?
John (Bigsmoke)