Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: 1 [2]

Author Topic: Favorite glues?  (Read 2475 times)

Offline Three Hawks

  • TMA Forum Member
  • ***
  • Posts: 391
(No subject)
« Reply #15 on: June 18, 2008, 05:23:04 PM »
I've used glues, cements, and adhesives professionally man and boy for over forty five years.  Boatbuilder,  you see.   My experience is glueline failure is 99% operator error.  Usually from not reading and using the manufacturer's instructions.

[size=150]READ AND FOLLOW THE BLOODY INSTRUCTIONS ! ! ![/size]  It'll give ya sump'n to do on the way out to the garbage can.

Most of the time the manufacturer actually has some hint of an idea as to what is required.  

I know, I know, that's just crazy talk, sorry.

Three Hawks
« Last Edit: June 18, 2008, 07:07:19 PM by Three Hawks »
Logged
TMA #360
????? ?a??
Whatever doesn't kill me had better start running.

Offline Gambia

  • TMA Forum Member
  • ***
  • Posts: 58
(No subject)
« Reply #16 on: June 18, 2008, 05:38:26 PM »
When all else fails READ THE MANUAL!
Logged

Offline 2-bellys

  • TMA Forum Member
  • ***
  • Posts: 634
(No subject)
« Reply #17 on: June 18, 2008, 06:39:30 PM »
:lt th
Logged
"a society that refuse to remember there history
is destined to repeat all of the mistakes of there past "

Offline Groundhog

  • TMA Forum Member
  • ***
  • Posts: 561
(No subject)
« Reply #18 on: June 18, 2008, 07:53:34 PM »
glue has directions ? Now all the fun is over.
Next ya gonna tell me there are warning labels...
lol
Logged
TMA Member # 273 EXP. 07/15/08
Conocheague Valley Men
Keep the Tradition Alive for Future Generations !
Remove all WARNING LABELS , survival of the fittest.
go look at my blog    http://shootingpouch.blogspot.com/

Offline Three Hawks

  • TMA Forum Member
  • ***
  • Posts: 391
(No subject)
« Reply #19 on: June 18, 2008, 08:56:27 PM »
Quote from: "Groundhog"
glue has directions ? Now all the fun is over.
Next ya gonna tell me there are warning labels...
lol

Try not to get too much in yer nose.  Nothin' quite so pathetic as a groundhog with his paw permanently glued up his nose.

Three Hawks.
Logged
TMA #360
????? ?a??
Whatever doesn't kill me had better start running.

Offline Groundhog

  • TMA Forum Member
  • ***
  • Posts: 561
(No subject)
« Reply #20 on: June 18, 2008, 09:06:12 PM »
thatsa stickie booger'
What really bothers me is when you do read the instructions before hand and whatever the product is ... it performs poorly or fails totally.
 Gorilla glue does seem to work well on wood to wood aplications but falls short on others.
Also the expansion quality is sometimes a problem when you are trying to do neat work.
Epoxies have always given me the best results when a glue is needed but you sure can't beat a weld or solder or even a rivet for keepin it all together.
lol
Logged
TMA Member # 273 EXP. 07/15/08
Conocheague Valley Men
Keep the Tradition Alive for Future Generations !
Remove all WARNING LABELS , survival of the fittest.
go look at my blog    http://shootingpouch.blogspot.com/

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
(No subject)
« Reply #21 on: July 23, 2008, 07:31:40 AM »
Devcon slow set. Alcohol has no effect on it that I've ever seen. Even acetone has no immediate effect on it, once cured. It is optically clear, and absorbs what ever spectrum of color it is on. If you have a glue line, you didn't fit things close enough.
Logged

Online Uncle Russ

  • TMA Contributing Member
  • ***
  • Posts: 7338
  • TMA Founder. Walk softly & carry a big Smoothbore!
  • TMA Member: Founder / Charter Member #004
  • Location: Columbia Basin, Washington State
(No subject)
« Reply #22 on: July 23, 2008, 11:02:41 AM »
Quote from: "LRB"
Devcon slow set. Alcohol has no effect on it that I've ever seen. Even acetone has no immediate effect on it, once cured. It is optically clear, and absorbs what ever spectrum of color it is on. If you have a glue line, you didn't fit things close enough.

Devcon has been my own personal favorite for years.

Uncle Russ...
Logged
It's the many things we don't do that totally sets us apart.
TMA Co-Founder / Charter Member# 4

Offline woodman

  • TMA Forum Member
  • ***
  • Posts: 226
(No subject)
« Reply #23 on: July 23, 2008, 11:46:17 AM »
As a woodworking professional. I would not waste my money on any of the Polyurethane glues.
  From the expanding action they develop a very weak bond that is very easily broken.All failures that I have seen with Gorilla glue and there like, have broken thru the glue line with no wood failure.
   For metal to wood epoxy is the best. Followed by urea formyldihide .  
 Woodman
Logged
Colorado TMA State Representative
Founding Member Uncompahgre Freetrappers
 associate member War Eagles
Happy Canyon Rendezvous Booshway
Tma Member #413 exp 1/21/11

Offline J.M.

  • TMA Forum Member
  • ***
  • Posts: 11
(No subject)
« Reply #24 on: July 26, 2008, 03:56:38 PM »
I like Devcon 20 minute clear epoxy. Never had any issues with it , dries clear. As long as your fit/finish is good you will not notice it. On hidden tang knives I like JB Weld.
Logged

Offline T.C.Albert

  • TMA Forum Member
  • ***
  • Posts: 16
    • http://www.thehuntingpouch.com
(No subject)
« Reply #25 on: July 28, 2008, 01:36:09 PM »
Liquid hide glue, tweeked with a few drops of vinegar to accellerate dry time is pretty handy to have around....the same mixed with brick dust makes a good "cutlers" filler as well.
Its not a super strong thing, but it works well enough for
traditional applications.
T.Albert
Logged
what if the hokey pokey really is what its all about?
Pages: 1 [2]
« previous next »