Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: [1]

Author Topic: My first knife done!  (Read 1612 times)

Offline jtwodogs

  • TMA Forum Member
  • ***
  • Posts: 90
My first knife done!
« on: January 18, 2015, 06:57:50 PM »
I have taken up knife building, been trying to learn how to do it. I wanted my first couple to be made of materials that could have been found in the 1800's. So my first was made from old file stock, a piece of natural Osage Orange that happen to be ate up with cut ants (Posed a challenge), and carbon steel for the guard and 20 penny nails for the pins. I learned a lot on this hopefully the next one, a big bowie will be better. As it is this one was re-tempered by Peters to a 59 RC, and holds a scary sharp edge, I cut up one of my wifes Cosmo sliced up one page at a time then shaved a big patch of hair off my arm with just the weight of the blade.


Logged
#423 renew 3/14/10
George Washington
" It is impossible to rightly govern the world without God and Bible."
 May 12, 1779

Offline sse

  • TMA Contributing Member
  • ***
  • Posts: 5370
  • TMA Founder
  • TMA: TMA Co-Founder, Charter Member, BoD.
  • TMA Member: Charter Member #3
Re: My first knife done!
« Reply #1 on: January 18, 2015, 09:29:33 PM »
Decent...that would be a very handy tool to have on hand... :bl th up
Logged
Regards, sse

************
Consider joining the TMA...If you're not a member, you're missing out...

TMA Member #3
Exp. July A.D. 1821

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
Re: My first knife done!
« Reply #2 on: January 19, 2015, 07:15:24 AM »
I like it!I could bone out a deer real nice with a nice knife like that. :rt th
Logged
Minnesota TMA State Representative

Member #247

Offline lonehunter

  • TMA Forum Member
  • ***
  • Posts: 69
Re: My first knife done!
« Reply #3 on: January 24, 2015, 12:02:59 PM »
Not a bad first, keep at it.
Logged

Offline wrichi +

  • TMA Forum Member
  • ***
  • Posts: 1
Re: My first knife done!
« Reply #4 on: September 07, 2015, 09:13:45 AM »
Dear sir
May I know, how you treated the blade after grinding.
Thank you
Logged

Offline hawkthrower

  • TMA Forum Member
  • ***
  • Posts: 161
  • TMA Member: 732
  • Location: NM
Re: My first knife done!
« Reply #5 on: September 08, 2015, 09:41:19 AM »
well done first one outa the gate ! Keep it up - post more of your work!!
Logged
"Never utter these words! 'I do not know this—therefore it is false.'
One must study to know, know to understand, understand to judge."
The apothegm of Narada,
an ancient east Indian philosopher

Online rollingb

  • TMA BoD
  • ****
  • Posts: 6957
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
Re: My first knife done!
« Reply #6 on: September 08, 2015, 10:29:12 AM »
Darn good lookin' knife!  :hairy
Logged
"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Offline Voyageur

  • TMA Forum Member
  • ***
  • Posts: 602
Re: My first knife done!
« Reply #7 on: September 08, 2015, 04:38:14 PM »
I like it----wish I could duplicate it-----"Doc" :hairy
Logged
Artillerymen Do It With A Bang
Artillery the King of Battle
St. Barbara-Pray for us !

NRA Endowment Life

Charter Member #104-10/22/15
"JOIN THE TMA TODAY"

Offline wattlebuster

  • TMA Forum Member
  • ***
  • Posts: 126
  • TMA Member: Member #223 Expiration Date 08/13/18
  • Location: AL
Re: My first knife done!
« Reply #8 on: September 08, 2015, 07:44:35 PM »
looks darn good for your first. I cant wait to see your 10th
Logged
Pleasure is the feel of a fine handmade southern iron mounted flintlock on a still frosty morning
Member # 223
Membership Exp 08/13/18
Member NMLRA
member CLA

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
Re: My first knife done!
« Reply #9 on: September 09, 2015, 01:48:33 PM »
Quote from: "wrichi +"
Dear sir
May I know, how you treated the blade after grinding.
Thank you

He sent it out to Peters Heat Treating. They have a very good reputation for doing the carbon steels. If you can grind a blade out of a file, without over heating, all it requires to temper is to put it in your kitchen range at 400° to 425° for 2, one hour tempers. Use a separate oven thermometer for accuracy. Most kitchen ranges are notoriously inaccurate when used for tempering. A good quality file already has the most perfect grain structure one can ask for, and is at max hardness. Not even Peters can make it better. The trick is to not over heat the edge area when grinding it. If you get any color in that edge area more than a light bronze, the game is over, and it will need to be re-heat treated.
Logged

Offline snake eyes

  • TMA Forum Member
  • ***
  • Posts: 2089
    • http://www.traditionalmuzzleloadingassociation.com
  • TMA Member: 10
Re: My first knife done!
« Reply #10 on: September 09, 2015, 06:23:27 PM »
Quote from: "LRB"
Quote from: "wrichi +"
Dear sir
May I know, how you treated the blade after grinding.
Thank you

He sent it out to Peters Heat Treating.
LRB,
 You certainly are well informed.....Thanks for that information.
snake-eyes  :shake
Logged
Erin Go Bragh
TMA Co -Founder & Charter member #10 to   7/1/2019
Ohio TMA State Rep[/color]
Life member: NAHC
Life member: NRA
Member: Columbus M/L GC

"If you come to a fork in the road....take it!"
    Yogi Berra
Pages: [1]
« previous next »