Traditional Muzzleloading Association
Craftsmanship => Antiques and Treasures => Topic started by: ridjrunr on November 26, 2020, 06:50:14 PM
-
A motley little horn found at a local junk shop. It does have a nive 8 sided tip and walnut base plug. I've since filled the bug chew areas with beeswax and am contiplating doing a rawhide wrap where the base plug meets horn.
-
Chew area
-
What a beautiful old horn! :hairy :applaud :*:
If you need a bit of deer rawhide to use as a repair,... just let me know. :hairy :shake
-
That's going to make a dandy horn when repaired!
-
That's mighty purty! A rawhide wrap looks imperative. :bl th up
~Kees~
-
Cool find, keep us posted on the progress.
Kevin
-
I decided to go ahead and repair using period like materials, rawhide, beezwax and linen thread.
I first filled the chew area with beezwax and let it set up good and hard.
Fellow TMA brother Rondo was kind enough to send me some deer rawhide, which is much thinner and easier to work with than cattle rawhide, thanks Rondo!
-
The method was very straight forward, measure and cut out the 7"x1" pc of rawhide, soak in warm water for a few minutes, punch some holes and lace it up! I also put a 1"x1" pc of rawhide underneath the seam where the lacing is. As it was drying it was clear it would tighten up and form around the juncture of the horn to base plug.
-
Looks good Dan. :bl th up
-
I agree with Hank, that does look good! :hairy
-
Good job Dan! :applaud :hairy
Here's a tip when lacing your rawhide,.... after lacing and tying your double knots, slide your needle and thread back between the horn and rawhide (about 1" and at about a 45 degree angle to your lacing) and bring the needle and thread back up through your rawhide then cut the thread off flush with the rawhide.
As the rawhide dries and shrinks it will lock the tail of your thread in place between the hide and horn which helps prevent the possibility of your knot coming untied. :bl th up
-
Well done there Dan! 2 thumbs up! :hairy :hairy
-
That should be good for another 100 years or so! :hairy
~Kees~
-
Looking good. Feels good putting old things back in service.
-
Thanks ya'll, it was a fun little project with the bonus of being a usable horn. I'll see if this holds enough 3F to get me through a woodswalk at our monthly club shoot using my .36 Ohio rifle.