Traditional Muzzleloading Association

Craftsmanship => Gun Building and Repair => Topic started by: greyhunter on July 03, 2011, 02:52:28 PM

Title: Fowler question
Post by: greyhunter on July 03, 2011, 02:52:28 PM

I am ready to pin my barrel to the stock, but I have a problem. The nose cap does not lie tight to the barrel when the barrel is in place. At this point I am ready to cut the wood that holds the nose cap and do away with it. This is a TVM American fowler, I have tried to find gallery pics of other fowlers here, but most don't show the barrel end. So unless someone has a trick to suck the nose cap to the barrel the saw is coming out!

Title: Re: Fowler question
Post by: Roaddog on July 04, 2011, 06:52:10 AM

I would call Mat and tony at TVM. They are grate folks and will help ya. I'll dig around and fined there phone #.

Title: Re: Fowler question
Post by: Roaddog on July 04, 2011, 07:02:04 AM

I found it TVM phone #1-662-287-6021