Traditional Muzzleloading Association
The Center of Camp => The Campfire => Topic started by: Winter Hawk on April 02, 2020, 07:54:52 PM
-
Getting antsy here. Got out the sewing machine today and made a couple of surgical masks, like I saw on line Tuesday. That turned into quite the project. I have never been able to get the tension adjustments right on this machine and haven't used it enough to force myself to do that. I started out with the machine set as it was and the stitching was horrible, on top of which it kept jamming up on me. I finally got out the instruction manual. It said to first clean out all the lint and crud in the shuttle, then oil it. That helped with the jamming up but the stitches were still wrong; the top thread was pulled all the way through and the bottom thread was tight as a bob-wire fence. But there in the book it showed where to adjust the lower tension. I backed out the screw and the stitches started looking better. Backed it out some more and now they look more or less like they are supposed to. With all the finagling, what should have taken 20 minutes according to the video (of an accomplished seamstress) took from 2:00 to 5:45. The end result ain't purty, but they'll be serviceable.
So what have others been doing?
~Kees~
-
I made a Leman-ish belt bag, that I kinda messed up on the sewing on. I got it too close to the edge. Still working on the dye job. I'll post pics later.
-
Had the day off so I checked my bees and then pruned grape vines.
IronHand
-
Working on a Hat blank. Trying to sew in the inner headband. Going ree a all slow.
-
I have put off a thorough cleaning and reorganizing of my "man cave/hobby area/basement room all Winter. Today is THE DAY.
Well, to be honest, it's the day that I will start. Completion might take several days, even a week. But it will happen...
I have got to tackle it so that I have space to do some of the numerous projects on my "I should try that" list.
Updates to follow...
-
Cleaning Project Update - Made a great start yesterday, and actually have put in 45 minutes or an hour this morning before wifey got up and moving. Came across not one, but two projects I have already put back on the work bench. One is an antler palm piece for a bow drill fire set and the other is a snake pipe stem for my medicine pipe. The cleaning project has already got me pumped up to get it finished so I can get back to the crafting and "piddling" as my wife calls it... :lol sign
-
Hmm ........What kinda "Medicine" you smoking, Tex?
I think they called that a different kind of pipe in the 60's. :luff: :luff: :luff: :luff:
-
Be nice! :lol sign
Reminds me of a story...a true one bout me & my son. And since I know you cannot wait to hear it I will break down and tell it to you...no begging necessary.
While I was in Egypt the first time I was introduced to the water pipe...also known as Nargilahs, Argiliahs, Kishas, and in Jordan as the Hubbly-Bubbly. Being a life-long pipe smoker, I had to have one so bought one. Once I got home I proudly showed my new pipe to my 22 year old son.
He just burst out laughing and said," Call it whatever you want, Dad, but it is a Bong. You went to Egypt and bought a Bong..."
Still have it, and still smoke it...whatever you might call it... :lol sign
-
I always thought a "BONG" was the sound my head made whenever I accidently hit it on sumpthin' hard and immovable. :o
I learn sumpthin' new 'round here each and every day. :laffing :applaud
-
See? I'm not the only one who calls 'em as I sees 'em. BTW , I noticed that you neglected to say what you smoked in it!!!! :luff: :luff: :luff: :luff: :luff:
-
That lack of information might have been a slip...or it might have been intentional...but as they always say..."inquiring minds want to know... :bigsmile:
-
Be nice! :lol sign
Reminds me of a story...a true one bout me & my son. And since I know you cannot wait to hear it I will break down and tell it to you...no begging necessary.
While I was in Egypt the first time I was introduced to the water pipe...also known as Nargilahs, Argiliahs, Kishas, and in Jordan as the Hubbly-Bubbly. Being a life-long pipe smoker, I had to have one so bought one. Once I got home I proudly showed my new pipe to my 22 year old son.
He just burst out laughing and said," Call it whatever you want, Dad, but it is a Bong. You went to Egypt and bought a Bong..."
Still have it, and still smoke it...whatever you might call it... :lol sign
Unfortunately that is not a bong, common name in the states during the 60's and 70's was a hooka pipe, a bong in a round tube usually 8 to 12"'long with a stem that sticks out 45 degrees about 4 inches up with a bowl on it for your baccy ::) ::), on the opposite side of the tube there is a aprox 1/4" hole in the tube, you fill the bowl, cover the hole,start sucking on the open end of the tube, when the the tube is full of smoke, you let go of the finger cover the hole and VOILA!, lungs full of smoke, usually the tube has, water, wine, or ice in it the cool down the harshness out whatever your smoking, in a pinch a pringles can will serve as a start of a bong, don't ask me how I know this, I plead the 5th! :lol sign :lol sign :lol sign
-
Got the sewing machine out and made some face masks. Had a heck of a time as it kept breaking thread, it would bind up, made strange thumping noise and I was cussing it for sure! I even got the booklet out to see what I needed to do. Tore the whole machine apart to make sure it was oiled, still no better. I changed thread but it still kept breaking. Eventually it was breaking thread after 2 inches of stitching. Then I tried changing the needle and WOW, it purred like a kitten. :Doh! That's a good thing, as I have several other projects lined up for it. Anyway, we are ready to go out and party now!
~Kees~
[ Invalid Attachment ]
-
Yeah Winter Hawk my wife has made probably a dozen of those things in the past week or so, for me and the family and the folks that she works with. My job requires them and provides the throw-away kind but her's are better. Its been pretty much a requirement once they determined that the Corona Virus will survive in raw wastewater, along with eye protection and rubber gloves. There's been a lot of disinfecting sprays and wipes used around here lately. All the employees have to have their temperature checked before we can clock in.
-
HUNTER-GATHER DAY :bigsmile:
-
"Who IS that masked man? ;D ;D ;D
-
Yeah Winter Hawk my wife has made probably a dozen of those things in the past week or so
I bet hers are a lot nicer than mine! I would NOT make it as a tailor....
~Kees~
-
:hairy
-
I saw one over on Facebook... A gal made one out of her dad's under-ware with the raisin stripe showing... Ain't no one going near her! :laffing
Yes, it was "gross" but (no pun intended) her dad was happy it worked... :lol sign