Traditional Muzzleloading Association

Craftsmanship => Traditional Archery and Accoutrements => Topic started by: Ouchigan72 on October 25, 2016, 11:53:02 AM

Title: Coyote Quiver
Post by: Ouchigan72 on October 25, 2016, 11:53:02 AM
Made this quiver from a coyote pelt -n- the strap is from scrap from an old pair of leather pants. I'v tromped through the woods with it now for the last month. It has held up nicely in rain and sunny weather.
Title: Re: Coyote Quiver
Post by: Ouchigan72 on October 25, 2016, 08:15:18 PM
Guess I screwed up posting pic.....fixed it
Title: Re: Coyote Quiver
Post by: rollingb on October 25, 2016, 08:55:49 PM
Quote from: "Ouchigan72"
Made this quiver from a coyote pelt -n- the strap is from scrap from an old pair of leather pants. I'v tromped through the woods with it now for the last month. It has held up nicely in rain and sunny weather.
Looks good!  :hairy
Title: Re: Coyote Quiver
Post by: greyhunter on October 27, 2016, 09:06:41 AM
:hairy
Title: Re: Coyote Quiver
Post by: swampf0x on February 01, 2017, 02:26:45 AM
looks good, I picked up a coyote pelt this past fall, and I was thinking of making quiver out of it also.
Title: Re: Coyote Quiver
Post by: hawkthrower on February 01, 2017, 08:23:41 AM
:hairy
Title: Re: Coyote Quiver
Post by: Lonewolfe20 on February 01, 2017, 01:34:03 PM
Hate to ask a stupid question
Do you guys just attach or wrap a coyote hide around an existing quiver
If not could some body post some how tos to build one
I have a nephew who is shooting traditional and I have a couple yote hides and would like to build him one after seeing this
Title: Re: Coyote Quiver
Post by: Ouchigan72 on February 02, 2017, 07:51:44 AM
I turned the hide inside out (fur in).  lined up the edges in the shape I wanted then sewed it with artificial sinew. Started at the tail / butt end. sewing up the belly. Just past the front legs ( or where needed to have room to turn back to right side out) after turning fur side out I cut a hole in the heck area sewing the edge of the circle.(this was done so the head hung down.) sewed head in place but only enough to cover -n- close where stopped sewing up belly. Lastly I sewed a strap made from scrap leather to it. ...I didn't use a plan just kinda winged it -n- ran with an idea I had....Good luck
Title: Re: Coyote Quiver
Post by: Fletcher on February 03, 2017, 12:14:20 PM
Pelt quivers done right are gorgeous and work well if you can stiffen them and get
the strap angle comfortable.  I have seen some made with a thin rawhide liner
that holds shape nicely.  That said - these are not the best to take out in the rain.
Arrows do not take kindly to a cold, wet, limp dog  :hey-hey
Title: Re: Coyote Quiver
Post by: Ouchigan72 on February 03, 2017, 06:24:01 PM
Agree that getting the strap right helps... had to redo the strap a couple times to find the "sweet spot". I used this quiver all of this season in all types of weather, It held up nicely though had to dry it after more than a few hunts before putting arrows back in it. Very quiet when stalking through the brush -n- never dumped the arrows when bending -n- such.
Title: Re: Coyote Quiver
Post by: hawkthrower on February 05, 2017, 10:45:30 AM
Quote from: "Fletcher"
Pelt quivers done right are gorgeous and work well if you can stiffen them and get
the strap angle comfortable.  I have seen some made with a thin rawhide liner
that holds shape nicely.  That said - these are not the best to take out in the rain.
Arrows do not take kindly to a cold, wet, limp dog  :shock: