Traditional Muzzleloading Association

Craftsmanship => Accoutrements => Topic started by: Spotted Bull on August 07, 2020, 09:28:36 AM

Title: Elk Antler Pan Primer
Post by: Spotted Bull on August 07, 2020, 09:28:36 AM
Bought this years ago. Holds quite a bit of 4F.
(https://i.ibb.co/5Kn469f/20200807-082631.jpg) (https://ibb.co/XY3Lb4v)
Title: Re: Elk Antler Pan Primer
Post by: BEAVERMAN on August 07, 2020, 10:10:05 AM
I like this one!
Title: Re: Elk Antler Pan Primer
Post by: Oldetexian on August 07, 2020, 02:20:58 PM
This is a good looking piece! I just admire the simplicity and the workman-like,no-nonsense style. I would be right proud to carry a piece like this.
Title: Re: Elk Antler Pan Primer
Post by: BEAVERMAN on August 07, 2020, 02:32:54 PM
Bull, there's only one thing I would change on this, if the brass tip was filed at a 15to 20 dergee angle it would be easier to dispense the powder in the pan!
Title: Re: Elk Antler Pan Primer
Post by: Spotted Bull on August 07, 2020, 02:37:03 PM
Absolutely.

But I'm probably going to be switching to caplock. If I do this will go onto the Trade Blanket.