Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: [1]

Author Topic: New Furniture for Camp  (Read 2663 times)

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
New Furniture for Camp
« on: September 22, 2009, 10:50:43 PM »
I recently completed a new piece of furniture for use in my camp during Rendezvous.  It is a wash stand that is based on an early 1800s piece.  

Here are pictures of the original


This is my version


I used it for the first time at Ravensdale and it exceeded all my expectations.  It was so wonderful to be able to wash up and get ready for the day in my tent without fussing with what goes were or having to wash up in public.  Besides my small stove to heat up my morning tea followed by wash water warmed the tent up nicely making getting dressed that much more pleasant a task. :lol:
Logged
Sir Michael
Charter Member #132

Offline Shadow Hawk

  • TMA Forum Member
  • ***
  • Posts: 86
(No subject)
« Reply #1 on: September 23, 2009, 12:21:31 AM »
That is outstanding.
    very nice work. I like that you did a more sturdy version. 8)
Logged
State Rep Washington State, Central Washington
TMA Member # 501 expires 8/30/15

Spotted Bull

  • Guest
(No subject)
« Reply #2 on: September 23, 2009, 06:12:04 AM »
Beautiful work, Sir Michael!
Logged

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
(No subject)
« Reply #3 on: September 23, 2009, 06:26:06 AM »
Very well dun Sir.
Logged
Minnesota TMA State Representative

Member #247

Offline Ironwood

  • TMA Forum Member
  • ***
  • Posts: 116
(No subject)
« Reply #4 on: September 23, 2009, 07:28:07 AM »
Beautiful job!  I'm continually amazed at the myraid of talent in this forum.
Logged
Born in the Pineywoods of East Texas a long long time ago!

GO GREEN!   Recycle Congress!

Offline Longhunter

  • TMA Forum Member
  • ***
  • Posts: 1853
    • http://www.shrewbows.com
  • TMA Member: Charter Member #54 Expires 03/26/2019
(No subject)
« Reply #5 on: September 23, 2009, 10:06:39 AM »
Very nice. I can see the possibility of another use by putting the pan on the lower shelf... :roll eyes
Logged
Ron LaClair
TMA Charter member #54 Valid until 03-26-2019

RON_LACLAIR.html

TMA, Keeping the traditional spirit alive by example

When the deer are gone I will hunt mice, for I am a hunter

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #6 on: September 23, 2009, 12:42:35 PM »
Ron, if you are really interested I have pictures of a camp head and bidet. :?
Logged
Sir Michael
Charter Member #132

Offline No Rod

  • TMA Forum Member
  • ***
  • Posts: 1788
  • TMA Member: 80
(No subject)
« Reply #7 on: September 23, 2009, 08:52:54 PM »
:Doh!
Logged
Get rid of everything that isn't useful, beautiful or joyful, the portage will be much easier.

Jon Bertolet
TMA Charter Member #80

Offline Trois Castors

  • TMA Forum Member
  • ***
  • Posts: 334
(No subject)
« Reply #8 on: September 27, 2009, 06:57:43 PM »
Just wondering, did you take measurements off the origional
or is there some plans you could share? ;) (I like it!)

Regards,
Logged
Jed"3Beavers"
Ontario Canada Provincial TMA Representative[/color]
TMA#272 till 09/01/16
Friends of the Voyageur
Saugeen Paddlers

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #9 on: September 27, 2009, 09:10:48 PM »
Basically I just looked at the picture and made some basic decisions.  The shelves had to be just under half the height of the piece and the top shelf needed to be about the same height of the bathroom vanity.  The width was pretty much arbitrary based on the size of the basin bowl I found.  I used two 2ft long turned spindles cut in half and attached to a 2x2 at the top and in the middle.  The top and intermediate styles on the back and sides were sized based on looking at the photos.

I made one departure from the original.  The sides of the original hinged 270 deg around to the back for packing.  I looked for a long time and could not find any small 1-1/2" tall hinges with 2" wide leaves that were not drilled (the holes had to be toward the outer edge of the leaves so that there would be wood to bite when mounted on the required 45 deg beveled edge.

I added a narrow side piece on each end of the back frame to accommodate the cleat on the underneath side of the shelves and the thickness of the leg fonts so the sides would fold flat against the front.

On the whole it came out pretty good I think?
Logged
Sir Michael
Charter Member #132

Offline pathfinder

  • TMA Forum Member
  • ***
  • Posts: 741
(No subject)
« Reply #10 on: September 27, 2009, 09:32:23 PM »
After having either a diamond or a small trapper tent for years,it's absolutely AWSOME to be able to stand inside the lodge and wash up with warm water. HEAVEN!!!!!!!!!!!!!! :hey-hey
Logged
NRA life member
NMLRA

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #11 on: September 27, 2009, 09:33:53 PM »
It most certainly is. :hey-hey  :hey-hey
Logged
Sir Michael
Charter Member #132
Pages: [1]
« previous next »