Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: [1]

Author Topic: Fowler question  (Read 981 times)

Offline greyhunter

  • TMA Forum Member
  • ***
  • Posts: 1491
  • TMA Member: Membership #291, Expires 2/11/2019
Fowler question
« on: July 03, 2011, 02:52:28 PM »
I am ready to pin my barrel to the stock, but I have a problem. The nose cap does not lie tight to the barrel when the barrel is in place. At this point I am ready to cut the wood that holds the nose cap and do away with it. This is a TVM American fowler, I have tried to find gallery pics of other fowlers here, but most don't show the barrel end. So unless someone has a trick to suck the nose cap to the barrel the saw is coming out!
Logged
Pa. TMA State Representative.[/color]
Member#291  2/11/19

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
Re: Fowler question
« Reply #1 on: July 04, 2011, 06:52:10 AM »
I would call Mat and tony at TVM. They are grate folks and will help ya. I'll dig around and fined there phone #.
Logged
Minnesota TMA State Representative

Member #247

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
Re: Fowler question
« Reply #2 on: July 04, 2011, 07:02:04 AM »
I found it TVM phone #1-662-287-6021
Logged
Minnesota TMA State Representative

Member #247
Pages: [1]
« previous next »