Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Powder horn bungs  (Read 1278 times)

Offline Woodrock

  • TMA Forum Member
  • ***
  • Posts: 45
Powder horn bungs
« on: October 20, 2013, 05:29:37 PM »
Being too cheap (it's a Scots thing) to buy violin pegs for powder horn bungs, I grabbed some scraps in the shop, and turn a few. since, I had to make a tapering tool, I went ahead and turned bungs for two hours. Here is the result, all tapered to 1:30 to match my taper reamer.
Woody

Online rollingb

  • TMA BoD
  • ****
  • Posts: 7010
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
Re: Powder horn bungs
« Reply #1 on: October 20, 2013, 07:32:44 PM »
Those ought to keep you busy building horns for awhile.  :rt th
"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Offline ridjrunr

  • TMA Forum Member
  • ***
  • Posts: 1261
  • Location: KS
Re: Powder horn bungs
« Reply #2 on: October 20, 2013, 09:33:32 PM »
Wow,those are super nice. Would you be willing to show the set up you use in your lathe for doing those?
I usually end up making plugs out of broken arrow shafting :Doh!
HCH member
NRA member
Fluent in English and sarcasm
TMA Member #313
Expires 10/8/21

Offline Woodrock

  • TMA Forum Member
  • ***
  • Posts: 45
Re: Powder horn bungs
« Reply #3 on: October 20, 2013, 11:50:24 PM »
ridjrunr:
I will take a photograph tomorrow ,,,Basically, I tun a round, then chuck in a four jaw, rough turn the taper, then run the pencil sharpener like taper tool up the taper, and turn the finial.
Woody   Takes longer to explain then do.

Offline ridjrunr

  • TMA Forum Member
  • ***
  • Posts: 1261
  • Location: KS
Re: Powder horn bungs
« Reply #4 on: October 21, 2013, 06:40:05 PM »
I've only a 3 jaw, so will have to  figure out my own process. I would like to see this taper tool you speak of  :idea
HCH member
NRA member
Fluent in English and sarcasm
TMA Member #313
Expires 10/8/21

Offline greggholmes

  • TMA Forum Member
  • ***
  • Posts: 209
  • TMA Member: 675
Re: Powder horn bungs
« Reply #5 on: October 21, 2013, 07:55:56 PM »
« Last Edit: October 22, 2013, 01:49:37 AM by greggholmes »
Member #675
Skagit Muzzle loaders
Expires June16, 2017

Any arm save our mothers', that arm is Brown Bess!


Offline Uncle Russ

  • TMA Contributing Member
  • ***
  • Posts: 7342
  • TMA Founder. Walk softly & carry a big Smoothbore!
  • TMA Member: Founder / Charter Member #004
  • Location: Columbia Basin, Washington State
Re: Powder horn bungs
« Reply #6 on: October 21, 2013, 11:10:06 PM »
Woody, I can't rightly say why, but those "double-stack", for lack of the correct term, located at low center, certainly have appeal to me.
I always considered a Fiddle Peg to be about the ultimate for such work, but I'm no longer sure that's a fact.

I have lost a plug or three over the years and always ended up making a "make-shift" plug from whatever was handy, never dreamed you could add a touch of class if you had the desire....a plug has always been a plug, at least up until this point.

Good looking work and would certainly add to the appearance of any horn!  :notworthy

Uncle Russ...
It's the many things we don't do that totally sets us apart.
TMA Co-Founder / Charter Member# 4

Offline Woodrock

  • TMA Forum Member
  • ***
  • Posts: 45
Re: Powder horn bungs
« Reply #7 on: October 22, 2013, 02:30:59 AM »
Russ: The 'double stack' are supposed to be Scottish thistles.  I saw one in a powderhorn in Scotland years ago.  My take on turn bungs is they would be more period correct tan would a fiddle peg. Wood turners were common in the early years and could have made tapered bungs for horns both quickly, and easily. Many extant horns   seem to have turned bungs, but I have only seen old horns in photographs, not close up.
Woody

Offline Uncle Russ

  • TMA Contributing Member
  • ***
  • Posts: 7342
  • TMA Founder. Walk softly & carry a big Smoothbore!
  • TMA Member: Founder / Charter Member #004
  • Location: Columbia Basin, Washington State
Re: Powder horn bungs
« Reply #8 on: October 22, 2013, 11:09:17 AM »
Quote
The 'double stack' are supposed to be Scottish thistles.

 :Doh!  Of course!
I can see it plain as day, now that you've pointed it out.

Uncle Russ....
It's the many things we don't do that totally sets us apart.
TMA Co-Founder / Charter Member# 4

Offline W. Welshman

  • TMA Forum Member
  • ***
  • Posts: 418
    • http://www.theweavingwelshman.com/home
  • TMA Member: 321
Re: Powder horn bungs
« Reply #9 on: October 23, 2013, 02:13:37 PM »
:hairy
Idaho North TMA State Representative

http://www.theweavingwelshman.com/home