Traditional Firearms > Flintlock Pistols

Test Fired Old and New

(1/2) > >>

Jamesk58:
Finally I was able to take my 3 antique pistols and a new Pietta 1851 Navy out for a test fire.  I charged all the muzzle loaders the same with roughly 50 gr of BP and the calibers range from 64-70. Even after careful measurement of the bores and helpful advise through Track, the ball/wad combo just seemed a bit too tight on two of the pistols.  I really didn't want to force the ball down that hard so I packed the lubed wad on top instead of between ball and powder.

The Spanish Migulet was first and did just fine. I believe that one flashed once w/o fire but after a fresh pinch of powder it touched off nicely.  My only complaint is that the grip is very short with the lock and spring stationed just on the inside of my index finger.  Couldn't really find a comfortable way to hold it and ended-up getting a nice bloody cut.  It may be a good thing as it will teach me to shoot it left-handed-   .

2nd was the Belgian percussion and there were no issues with that one.  It's 70 cal and I recently modified the nipple to take a #11 and everything worked swell.  Fun to shoot!

3rd was the British Tower pistol and the charge ended up getting fouled I believe from too much oil and lube from my earlier restoration efforts.  Sooo glad I bought and brought a ball puller.  I had a bad feeling I would need it and sure did.  Thought I had that chamber clean and dry but guess not.  Made sure it was fully cleaned and dry when I got home and will give it another whirl before long.

Finally tried out the Pietta 1851 I bought almost 3 months ago from Dixie.  2 complaints about the nipple and cap interaction. 1st, the opening on the frame that gives you access to the nipple is quite small and shallow.  I don't have particularly large hands but you need little alien fingers to place the #10 cap on the nipple PLUS no matter how hard you push down, it won't seat all the way.  Even with a capper I don't think you can press the cap down far enough for it to fire.  Twice the gun "dry-fired" all the way around the cylinder and then the next time around the caps went and fired the cylinders.  It took the hammer to push the caps down flush to the nipples in order for them to ignite.

I know there are plenty of aftermarket nipples available and not sure which may be best or if changing the nipples is the right move.  Any suggestions on that would be appreciated.

Anyway, good fun and learned a bit too.  I'll head back soon.

rollingb:
Sounds like fun!!!!!!!  :rt th

Jamesk58:
Yeah, that does sound like a simple solution.
Thanks!

Roaddog:
You have a nice brase of pistols there sir.Thanks for sharing with us.

hawkthrower:
Measure the nipples with a caliper. They may be for #11 caps!
I have several revolvers (an 1858 or two in the group) that will take #11's......handy in the field not to have to carry both....

Navigation

[0] Message Index

[#] Next page