yep i have a Winchester set i carry in my shoot box .
While the bits are precision bits , they are rather soft and can be twisted , especially the smaller ones .
Also I found that some of the standard slot bits are not that precision . The handle has a press fit ¼ in ,chuck that the bits fit into and that gets lose rather quick .
The handle is also hollow so as to hold bits ?? Why I don’t know as no gunsmith I know dumps their tools in there . The hollow handle has a cheep , thin plastic screw on cap like something found in the dollar bin. Mine Kept backing off . I finaly super glued it so I wouldn’t lose it .
Frankly its not a very good set . But for most muzzle loading needs , it will work just fine . Past that though and you will need to be real careful so you don’t bugger up what your working on . but it is alot better then trying to use a standard screw driver . That being said , I have had mine for probably ???12-15 years .
For in the shop , I have an old set of wood handled Forster and Grace drivers .
My most recent set I bought a few years ago from Brownells . It’s a Megna -Tip and I really like it .
While it doesn’t have the feel of the Grace drives , it does have a good tight lock up . It does come with a basic bit set which you then can add to if you find you need a specialty size . That saves you from paying 100.00+ for a good full set , when you only need 5-10 different slot heads for most common jobs
As to a recommendation , I would recommend the Megna- tip .
It will cost you a little more , around 30-40.00 when on sale .
However if you ever actually need a good gunsmith driver, you will have the right tool and if you strip out a screw head or slip and gouge a engraved sideplate , you wont be able to blaim anyone but yourself .
Topic: Cheap Screwdrivers (Read 3322 times)