Welcome to the TMA - the Traditional Muzzleloading Association
The TMA is always free to access: totally non-profit and therefore no nagging for your money, no sponsors means no endless array of ads to wade through, and no "membership fees" ever required. Brought to you by traditional muzzleloaders with decades of wisdom in weaponry, accoutrements, and along with 18th and 19th century history knowledge of those times during the birth our nation, the United States of America.
If you are a current TMA Contributing Member you MUST click HERE - IMPORTANT!


« previous next »
Pages: [1]

Author Topic: Plains pistol parts  (Read 2602 times)

Offline Lonewolfe20

  • TMA Forum Member
  • ***
  • Posts: 386
  • Total likes: 1
  • TMA Member: Member # 757 Expires 7/25/2020, Member & State Representative.
Plains pistol parts
« on: July 05, 2014, 02:38:30 AM »
I bought a pistol kit years ago from a junk store that was not finished. I was going to
Finish it this weekend but it doesn't seem that some of the screws are right
Does anyone know where to buy replacement parts

The barrel is just marked Spain no other maker marks
Logged
NRA Member
State Representative for South Dakota, contact me for more SD info
TMA #757

Riley/MN

  • Guest
Re: Plains pistol parts
« Reply #1 on: July 05, 2014, 09:37:15 AM »
Wood screws or machine screws? either way, if you get into one of those hdwe stores that have the bins full of screws you should be able to find something that will work. I would anticipate metric machine screws on a spanish pistol....
Logged

Offline Lonewolfe20

  • TMA Forum Member
  • ***
  • Posts: 386
  • Total likes: 1
  • TMA Member: Member # 757 Expires 7/25/2020, Member & State Representative.
Re: Plains pistol parts
« Reply #2 on: July 05, 2014, 12:51:53 PM »
Just came back from town struck out on all my screws
Also went to a local gun shop and I think we at least figured out the thread

The first one is 10x32 1 3/4 long it is the screw that goes through the barrel tang into the tigger assembly

The next we think were 3.5x.6 about 1/4 long they screw into the end of the barrel to hold on the brass cap on the stock

I might try and call Dixie Monday

Any other help is appreciated
Logged
NRA Member
State Representative for South Dakota, contact me for more SD info
TMA #757

Offline Detached

Re: Plains pistol parts
« Reply #3 on: July 05, 2014, 02:10:59 PM »
Look up Traditions Firearms on the net. They sell parts from their kits, odds are they'll have something. You'll have to email them. Also, if they don't have metric, get some cheap SAE taps and re-thread.
Logged
Alcohol, Tobacco, and Firearms should be a convenience store, not a government agency.

Offline Lonewolfe20

  • TMA Forum Member
  • ***
  • Posts: 386
  • Total likes: 1
  • TMA Member: Member # 757 Expires 7/25/2020, Member & State Representative.
Re: Plains pistol parts
« Reply #4 on: July 05, 2014, 03:29:16 PM »
Thanks I don't see parts for sale on the website but will
Contact them Monday
Thanks

I have been lookin forward to finishing this for about 5 years so appreciate the help
Logged
NRA Member
State Representative for South Dakota, contact me for more SD info
TMA #757

Offline Detached

Re: Plains pistol parts
« Reply #5 on: July 05, 2014, 03:36:38 PM »
Quote from: "Lonewolfe20"
Thanks I don't see parts for sale on the website but will
Contact them Monday
Thanks

I have been lookin forward to finishing this for about 5 years so appreciate the help


Look at the parts lists for their guns. Find one similar and I wouldn't be surprised if they're very close.
Logged
Alcohol, Tobacco, and Firearms should be a convenience store, not a government agency.

Offline Bigsmoke

Re: Plains pistol parts
« Reply #6 on: July 05, 2014, 05:43:20 PM »
Odds are that if it says Spain on the barrel, it is from Jukar, which makes the pistols for CVA and Traditions.
Find a parts list for whatever CVA or Traditions has and it is a good bet it will be correct.
Good luck.  In lieu of that, like Detatched said, get a cheap SAE set of taps and make the threads US.
John
Logged
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline Lonewolfe20

  • TMA Forum Member
  • ***
  • Posts: 386
  • Total likes: 1
  • TMA Member: Member # 757 Expires 7/25/2020, Member & State Representative.
Re: Plains pistol parts
« Reply #7 on: July 05, 2014, 06:56:53 PM »
Found the parts breakdowns thanks Detached

That is a good idea on tapping those to SAE

I browned the barrel last night so once I get these parts I am in business

Thanks for the input
Logged
NRA Member
State Representative for South Dakota, contact me for more SD info
TMA #757
Pages: [1]
« previous next »