Welcome to the TMA - the Traditional Muzzleloading Association

The TMA is always free to access: totally non-profit and therefore no nagging for your money, no sponsors means no endless array of ads to wade through, and no "membership fees" ever required. Brought to you by traditional muzzleloaders with decades of wisdom in weaponry, accoutrements, and along with 18th and 19th century history knowledge of those times during the birth our nation, the United States of America.


« previous next »
Pages: [1]

Author Topic: Shenandoah Oops and Repair  (Read 98 times)

Offline Winter Hawk

Shenandoah Oops and Repair
« on: January 19, 2026, 04:39:01 PM »
;banghead;   I made a major goof with my Traditions Shenandoah :o which resulted in about 14 inches at the muzzle end of the stock splitting and the split section breaking off the left side.  I'm not telling what stupidity I pulled, but the broken off portion has been glued back on (with Tite-Bond III).  I have sanded it smooth and stained it, need to finish it and it will be, not good as new but not too noticeable.  It seems to be solid again, and will look "used".  :laffing

~Kees~

P.s. - We need a crying emoji for these occasions!
Logged
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2027

Offline No Powder

  • TMA Contributing Member
  • ***
  • Posts: 886
  • Total likes: 651
  • TMA Exp. Date; Dec. 14 2026
  • TMA: Contributing Member
  • TMA Member: TMA Charter Member #75
  • Location: PA
Re: Shenandoah Oops and Repair
« Reply #1 on: January 19, 2026, 04:58:11 PM »
I knew you could do it Kees. Is that your postal shoot gun?
Logged


TMA Exp. Date; Dec.14 , 2026

Offline Winter Hawk

Re: Shenandoah Oops and Repair
« Reply #2 on: January 23, 2026, 03:23:13 PM »
The postal shoot gun has been the Hodgepodge rifle up to now.  I will probably use the Shenandoah this year and see how I make out.

~Kees~
Logged
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2027

Online Salty

  • TMA Contributing Member
  • ***
  • Posts: 191
  • Total likes: 100
  • TMA Exp date 12/19/27
  • Location: Texas
Re: Shenandoah Oops and Repair
« Reply #3 on: January 23, 2026, 04:26:50 PM »
Wow Kees, That what I call tenacity. Most people would have given up. That's a lesson for the rest of us.

 :hairy
Logged
We are supposed to be surrounded we're paratroopers
Captain Richard Winters, Bastogne 1944

TMA exp date 12/19/27

Offline Winter Hawk

Re: Shenandoah Oops and Repair
« Reply #4 on: January 24, 2026, 11:44:14 AM »
I believe Rob has made such repairs also, but I don't remember what glue he used.

~Kees~
Logged
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2027

Online RobD

Re: Shenandoah Oops and Repair
« Reply #5 on: January 24, 2026, 04:01:18 PM »
For the most part, I'll use Titebond Original aliphatic resin glue on stock repairs.  This is the safe bet and the results will be stronger than the wood itself. easy to clean up, but requires overnight for a cured bond.

Sometimes, for fast super bonding, where the two wood pieces have a perfect fit and are clean, I'll use a quality water thin CYA such as Hot Stuff.  This requires both pieces to be joined are pressed or clamped together hard, and THEN the CYA is wicked into the joint cracks.  Via capillary action the thin glue will get sucked in completely and saturate the joint.  This takes planning, patience, and practice as it's easy to mess up and bond skin to wood, not to mention getting the glue on places you didn't want to get glue on. 

Logged
Pages: [1]
« previous next »