Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: PC Type French Boucheron Trade Knife  (Read 1628 times)

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
PC Type French Boucheron Trade Knife
« on: March 06, 2011, 03:49:13 PM »
Just finished this one. A historically correct type French scalping knife traded to the NA's and others wanting a cheap and simple knife.  7" blade of 01 tool steel. Correct type oversized grip of Boxwood, with under tang gap filled with cutlers resin mixed with a brick dust filler. No epoxy used. Grip is riveted to the tang with iron pins.  Sheath is a center seam up the back. Hope you enjoy a look.


Offline Trois Castors

  • TMA Forum Member
  • ***
  • Posts: 334
(No subject)
« Reply #1 on: March 06, 2011, 04:20:31 PM »
Very nice........nice work! :lt th
Jed"3Beavers"
Ontario Canada Provincial TMA Representative[/color]
TMA#272 till 09/01/16
Friends of the Voyageur
Saugeen Paddlers

Offline rickevans

  • TMA Contributing Member
  • ***
  • Posts: 803
  • TMA: TMA Supporting Member #232 ....... Expires 7/5/19
  • TMA Member: 232
  • Location: GA
(No subject)
« Reply #2 on: March 07, 2011, 10:45:26 AM »
I really like your work Wick. Is a center seam sheath (back or front) also period correct?
R. C. (Rick) Evans
TMA# 232 Expires 7/5/22
Honorable Company of Horners
Contemporary Longrifle Association
Life Member NRA

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
(No subject)
« Reply #3 on: March 07, 2011, 01:33:45 PM »
More correct in the back Rick, at least the Euro imports. Hard to say what might have done here. Not too many survivors other than NA types.

Offline rickevans

  • TMA Contributing Member
  • ***
  • Posts: 803
  • TMA: TMA Supporting Member #232 ....... Expires 7/5/19
  • TMA Member: 232
  • Location: GA
(No subject)
« Reply #4 on: March 07, 2011, 01:41:44 PM »
You are right there, about not many original examples. My guess is from what I have been able to determine from manifests and inventories is that knives were send in bulk, many without handles attached.

I thouroughly enjoy your work and strive to work to your level as a bladesmith.

rick
R. C. (Rick) Evans
TMA# 232 Expires 7/5/22
Honorable Company of Horners
Contemporary Longrifle Association
Life Member NRA

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
(No subject)
« Reply #5 on: March 07, 2011, 04:42:20 PM »
Rick, if you happen across a manifest listing blades only, please let me know where I can see it. So far, I have seen no listing of just blades. Some say they did, but most researchers say no. I don't know, but would like to. One way or another.

Offline rickevans

  • TMA Contributing Member
  • ***
  • Posts: 803
  • TMA: TMA Supporting Member #232 ....... Expires 7/5/19
  • TMA Member: 232
  • Location: GA
(No subject)
« Reply #6 on: March 07, 2011, 06:04:05 PM »
Let me see where I stashed some of that stuff. Seemd to me to be a bit odd at that. What good would a trade knife be without handles? Figured they did it to compress the bulkyness...???
R. C. (Rick) Evans
TMA# 232 Expires 7/5/22
Honorable Company of Horners
Contemporary Longrifle Association
Life Member NRA

Offline Riley/MN

  • TMA Contributing Member
  • ***
  • Posts: 5100
  • TMA Member: Charter Member #20
  • Location: Montana
(No subject)
« Reply #7 on: March 07, 2011, 06:12:35 PM »
very nice work!
~Riley
><>


TMA Charter Member #20


Support Traditional Muzzleloading - Join the TMA!

Offline LRB

  • TMA Forum Member
  • ***
  • Posts: 137
(No subject)
« Reply #8 on: March 08, 2011, 07:02:11 AM »
It is Ken Hamiltons opinion that since labor was even cheaper in France than here, that it would have been just an unnecessary extra expense to handle them here, and most that are excavated with wood still attached, had boxwood or Euro beech for grips, and some with exotics. The English seemed to have used more exotics, but also the boxwood and beech.

Offline markinmi

  • TMA Forum Member
  • ***
  • Posts: 180
(No subject)
« Reply #9 on: March 09, 2011, 09:49:08 AM »
That is a beautiful piece of work.That sums up what a knife should be for any timber beast walking these woods.