Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Boiling Horns to get the center out?  (Read 2581 times)

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Boiling Horns to get the center out?
« on: August 31, 2020, 02:09:34 PM »
Okay guys - I need the expert advice of boiling horns to get the center core (or whatever it's called) out...

Q: How long to boil - approximately - and will the center slide out on its own, or what? What is the proceedure?

While cleaning out my metal shed this morning I found a bucket of cow horns someone gave some time ago... Anyway, if you don't mind - throw me some info on the above.

Thanks!  :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4277
  • TMA: Charter Member #150
Re: Boiling Horns to get the center out?
« Reply #1 on: August 31, 2020, 02:57:57 PM »
Joe,
Although I have processed thousands of cow horns into powderhorns and other things, I have never had the dubious pleasure of removing the core.  I think a long flexible, narrow knife would be a big help.  As would a 4 x 1/2" lag bolt to screw into the core.  A 1/4" bolt might work easier.  And it could be longer as well.
I am thinking someone posted a video here a few months ago showing how it was done.
I would guess boiling it maybe 10 minutes should be adequate.  As you say, you have had these horns some time, so the membrane could even be non-existent by now.
Hope these few thoughts help maybe even a little bit.

John (Bigsmoke)

P. S.  Would love to come visit you, but would not walk across the street to help you with this project.  Sorry, but I have managed to avoid boiling horns to remove cores for over 35 years.  Don't really want to start now. :wave  It was bad enough rough and fine sanding them all.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline PetahW

  • TMA Forum Member
  • ***
  • Posts: 505
Re: Boiling Horns to get the center out?
« Reply #2 on: August 31, 2020, 03:00:17 PM »
NRA Life Member since 1971
USAF Vet (Vietnam era)
Boy Scouts of America

EVERYONE HAS A HIDDEN TALENT THEY DIDN"T KNOW ABOUT UNTIL TEQUILA...

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Boiling Horns to get the center out?
« Reply #3 on: August 31, 2020, 04:13:24 PM »
Thanks guys!  Good info for sure.

John, we start tomorrow if you can make it???  :lol sign  (if it's not raining of course)... Thank you for the info.  :shake

PetahW, thank you - great information!

Guys, I did find one video on youtube that showed a guy boiling a horn then (I think it was after 10 minutes of boiling the horn - he took it out of the water and with his knife cut just above the base (all the way round) and pulled the core out...

I'll see if I can find that video again and posted here.

Thanks again, all good information from our good folks at the TMA!!!  :hairy

Here's the video I watched;





Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4277
  • TMA: Charter Member #150
Re: Boiling Horns to get the center out?
« Reply #4 on: August 31, 2020, 06:07:48 PM »
Yessir, Joe.  That's the one I was thinking of.  Glad you found it.
Enjoy, and don't forget, the soup you have left over is not the soup you bring in for lunch. :luff:
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Boiling Horns to get the center out?
« Reply #5 on: August 31, 2020, 06:15:42 PM »
Yessir, Joe.  That's the one I was thinking of.  Glad you found it.
Enjoy, and don't forget, the soup you have left over is not the soup you bring in for lunch. :luff:

Well dang!  :o  You go to the trouble of making horn soup and ye kain't even et' it...  :lol sign :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4277
  • TMA: Charter Member #150
Re: Boiling Horns to get the center out?
« Reply #6 on: August 31, 2020, 06:26:52 PM »
You can - I won't.
When I used to boil horns to soften them for rounding, I brought a bucket of "soup" into the shop at lunch time and set it on the cutting table that we used to dine around.  I couldn't convince any of the gals that it would be really good.  They did make me take it away, though.

John (Bigsmoke)
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Boiling Horns to get the center out?
« Reply #7 on: August 31, 2020, 06:29:08 PM »
 :lol sign

That be some wise gals!!!  :hairy
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Offline Winter Hawk

  • TMA Contributing Member
  • ***
  • Posts: 2571
  • Location: Chauncey, OH
Re: Boiling Horns to get the center out?
« Reply #8 on: August 31, 2020, 06:56:32 PM »
Be glad they made you take it away, and not force you to demonstrate how tasty it was! :o

~Kees~
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2025