Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: TC or GPR  (Read 1861 times)

Offline jimknife

  • TMA Forum Member
  • ***
  • Posts: 19
TC or GPR
« on: November 07, 2008, 09:48:54 PM »
Question for the more knowledgeable people.  Which would be a better gun a TC Cherokee FL or a GPR Fl and why?  The TC I can get for 250.  I haven't seen the TC he says he thinks it is a Cherokee.
Charter member  #138
12/05/10

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4277
  • TMA: Charter Member #150
(No subject)
« Reply #1 on: November 07, 2008, 10:56:26 PM »
I don't believe T/C ever made a Cherokee in flint.  So, if it's a flinter, it's either a Hawken, Renegade, PA Hunter or a Firestorm.

On a personal note, I think the T/C is a better quality gun with better finish, especially the older models.

The GPR is no doubt a more historically accurate appearing rifle.

Shooting wise, I think it is more the guy behind the gun than the rifle itself.  They both shoot well.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Online BEAVERMAN

  • TMA Contributing Member
  • ***
  • Posts: 6038
  • TMA: TMA Vice President
  • TMA Member: Charter Member #145
  • Location: Vaughn, WA
(No subject)
« Reply #2 on: November 07, 2008, 11:34:22 PM »
Smoke, didnt they make a Seneca in flint also?
Jim Smith
TMA Vice President
Charter Member #145  EXPIRATION 1/21/25
Green River Mountain Men
Peninsula Longrifles
WSMA
U.S.M.C.
BSA                    
Save America. Spay or neuter a liberal today.

"An armed man is a citizen,..an unarmed man is a subject!"

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4277
  • TMA: Charter Member #150
(No subject)
« Reply #3 on: November 08, 2008, 11:22:16 AM »
Beav,
I sure don't recall T/C ever making any of their small frame rifles in flint.  Nor were any Patriot pistols made that way, either.  I imagine someone could have converted one somewhere along the line, but it isn't factory.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline tg

  • TMA Forum Member
  • ***
  • Posts: 397
(No subject)
« Reply #4 on: November 08, 2008, 11:58:59 AM »
I would go for the GPR just for the more correct style these guns have when compared to the TC guns.

Online BEAVERMAN

  • TMA Contributing Member
  • ***
  • Posts: 6038
  • TMA: TMA Vice President
  • TMA Member: Charter Member #145
  • Location: Vaughn, WA
(No subject)
« Reply #5 on: November 08, 2008, 12:01:46 PM »
jimknife, if you havnt shouldered both firearms, you may want to check that out before you open the wallet, to me the GPR is way too muzzle heavy, JMHO
Jim Smith
TMA Vice President
Charter Member #145  EXPIRATION 1/21/25
Green River Mountain Men
Peninsula Longrifles
WSMA
U.S.M.C.
BSA                    
Save America. Spay or neuter a liberal today.

"An armed man is a citizen,..an unarmed man is a subject!"

Online rollingb

  • TMA BoD
  • ****
  • Posts: 7012
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
(No subject)
« Reply #6 on: November 08, 2008, 12:10:21 PM »
Quote from: "tg"
I would go for the GPR just for the more correct style these guns have when compared to the TC guns.

I agree,.... and they ain't no slouch in the "accuracy" department neither. :)
"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Offline Loyalist Dave

  • TMA Forum Member
  • ***
  • Posts: 687
  • TMA Member: 800
  • Location: MD
(No subject)
« Reply #7 on: November 08, 2008, 12:11:04 PM »
I like the GPR in flint over the TC.  I don't like the TC lock in their flinter very much.  

LD
It's not what you think you know; it's what you can prove.

Offline Three Hawks

  • TMA Forum Member
  • ***
  • Posts: 391
(No subject)
« Reply #8 on: November 09, 2008, 02:07:54 AM »
I've owned and shot both a Lyman GPR flinter and a T-C Hawken flinter, and to me the locks are so  similar as to be identical.  Like many if not most flintlocks, they have preferences as to what kind of flint they prefer and how they like it clamped in the jaws of the cock.    I prefer my T-C Hawken, but that's just me and the shape of the stock, both rifles are good, dependable arms.  As to fit and finish, both  are fine in the rifles I have.

As to historical accuracy, The Museum Of The Fur Trade in Chadron, NE states that as far as they know there is no extant example of a flintlock Hawken from the Hawken shop, nor is there mention of any in the Hawken records.

Your mileage, as always, may vary.

Three Hawks
« Last Edit: November 10, 2008, 07:11:43 AM by Three Hawks »
TMA #360
????? ?a??
Whatever doesn't kill me had better start running.

Offline hawkeye

  • TMA Forum Member
  • ***
  • Posts: 2154
(No subject)
« Reply #9 on: November 09, 2008, 10:36:00 AM »
I have a GPR with an L&R flint lock and I really like the looks of the GPR over the T/C.  Though it's hard to beat the customer service of T/C.
David M. Ely
Charter Member #141 Exp 1/11
=======================
"Third ball, haul..." Etherington's Coy 60th RAR

Offline Uncle Russ

  • TMA Contributing Member
  • ***
  • Posts: 7342
  • TMA Founder. Walk softly & carry a big Smoothbore!
  • TMA Member: Founder / Charter Member #004
  • Location: Columbia Basin, Washington State
(No subject)
« Reply #10 on: November 09, 2008, 10:54:24 AM »
Quote from: "hawkeye"
I have a GPR with an L&R flint lock and I really like the looks of the GPR over the T/C.  Though it's hard to beat the customer service of T/C.

Yep, same here with the GPR and I do own both but, like many others, I feel it's the customer service at T/C that puts them a wee bit ahead of the game.

Personally, I like the weighted forward handling of the GPR, but many don't.
Over the years I have developed the impression that the reason some folks like the weighted forward rifles, while others don't, is all in the shooting stance, and / or the way that particular person feels most comfortable when shooting, or holding the rifle.....

I feel the choice between a T/C and a GPR is a personal choice, and not one of which gives the best performance, although if you want wanted to split some very, very fine hairs, the GPR just might come out on top...but even that is somewhat subjective.

They are both winners, IMHO.

Uncle Russ...
It's the many things we don't do that totally sets us apart.
TMA Co-Founder / Charter Member# 4

Offline Mule Brain

  • TMA Forum Member
  • ***
  • Posts: 79
(No subject)
« Reply #11 on: November 09, 2008, 09:03:02 PM »
I have never owned a TC, I just never really cared for the looks of them. I know they make a good gun, and it's a good company as well!

I am however a GPR fan, and have both in flint, and cap. I am a big fan of double wedge keys too!

You really can't go wrong either way, it will probably come down to looks more than anything else!
Keep Your Powder Dry, And Your Back To The Wind!

Offline Gambia

  • TMA Forum Member
  • ***
  • Posts: 58
(No subject)
« Reply #12 on: November 10, 2008, 04:46:37 PM »
Beaverman gave good advice,try them both out before you take the plunge.There is a great difference in the way they handle.Its a matter of personal preference but a rifle that doesn't fit you is a real pain no matter how PC or accurate it is.