Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: 1 [2]

Author Topic: How many use dental x-ray lead?  (Read 1745 times)

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #15 on: July 25, 2009, 10:09:18 AM »
I hit the jackpot :?  the last time I went to the dentist.  In addition to the lead foil I got (as usual) he offered me two of those lead aprons they put over you when they take the x-rays.  I had to leave on a road trip the next day so all I had time to do was take a quick slice into one of them to see just how they were constructed.  Now comes the $64 question.  

What would be the best way to separate lead from rubber?  Solvent maybe? :(
Logged
Sir Michael
Charter Member #132

Offline Flinthawk

  • TMA Forum Member
  • ***
  • Posts: 18
(No subject)
« Reply #16 on: July 25, 2009, 05:18:21 PM »
Quote from: "Sir Michael"
I hit the jackpot :?  the last time I went to the dentist.  In addition to the lead foil I got (as usual) he offered me two of those lead aprons they put over you when they take the x-rays.  I had to leave on a road trip the next day so all I had time to do was take a quick slice into one of them to see just how they were constructed.  Now comes the $64 question.  

What would be the best way to separate lead from rubber?  Solvent maybe? :(
Sir Michael,
Is the rubber attached to the lead with some type of adhesive or is attached directly around the lead through some manufacturing technique?
Logged
TMA # 486  expires 7/12/10

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #17 on: July 25, 2009, 05:24:14 PM »
The rubber sheets seem to be impregnated with the lead.
Logged
Sir Michael
Charter Member #132

Offline Flinthawk

  • TMA Forum Member
  • ***
  • Posts: 18
(No subject)
« Reply #18 on: July 27, 2009, 03:06:00 PM »
Quote from: "Sir Michael"
The rubber sheets seem to be impregnated with the lead.
I was thinking if the lead was stuck with an adhesive possibly acetone might have worked. but if the rubber is impregnated with
the lead, then that is a different ballgame!
How big are the lead pieces ?
Logged
TMA # 486  expires 7/12/10

Offline Sir Michael

  • TMA Forum Member
  • ***
  • Posts: 2754
  • TMA: TMA Store
  • TMA Member: Charter Member #132
(No subject)
« Reply #19 on: July 27, 2009, 07:24:19 PM »
I'm guessing the lead is in powder form and they rely on three layers of it to ensure full coverage with the required density.
Logged
Sir Michael
Charter Member #132
Pages: 1 [2]
« previous next »