Welcome to the TMA - the Traditional Muzzleloading Association
The TMA is always free to access: totally non-profit and therefore no nagging for your money, no sponsors means no endless array of ads to wade through, and no "membership fees" ever required. Brought to you by traditional muzzleloaders with decades of wisdom in weaponry, accoutrements, and along with 18th and 19th century history knowledge of those times during the birth our nation, the United States of America.
If you are a current TMA Contributing Member you MUST click HERE - IMPORTANT!


« previous next »
Pages: [1]

Author Topic: Fowler question  (Read 2618 times)

Offline greyhunter

  • TMA Forum Member
  • ***
  • Posts: 1491
  • Total likes: 1
  • TMA Member: Membership #291, Expires 2/11/2019
Fowler question
« on: July 03, 2011, 02:52:28 PM »
I am ready to pin my barrel to the stock, but I have a problem. The nose cap does not lie tight to the barrel when the barrel is in place. At this point I am ready to cut the wood that holds the nose cap and do away with it. This is a TVM American fowler, I have tried to find gallery pics of other fowlers here, but most don't show the barrel end. So unless someone has a trick to suck the nose cap to the barrel the saw is coming out!
Logged
Pa. TMA State Representative.[/color]
Member#291  2/11/19

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • Total likes: 0
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
Re: Fowler question
« Reply #1 on: July 04, 2011, 06:52:10 AM »
I would call Mat and tony at TVM. They are grate folks and will help ya. I'll dig around and fined there phone #.
Logged
Minnesota TMA State Representative

Member #247

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • Total likes: 0
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
Re: Fowler question
« Reply #2 on: July 04, 2011, 07:02:04 AM »
I found it TVM phone #1-662-287-6021
Logged
Minnesota TMA State Representative

Member #247
Pages: [1]
« previous next »