Welcome to the TMA - the Traditional Muzzleloading Association
The TMA is always free to access: totally non-profit and therefore no nagging for your money, no sponsors means no endless array of ads to wade through, and no "membership fees" ever required. Brought to you by traditional muzzleloaders with decades of wisdom in weaponry, accoutrements, and along with 18th and 19th century history knowledge of those times during the birth our nation, the United States of America.
If you are a current TMA Contributing Member you MUST click HERE - IMPORTANT!


Author Topic: Pedersoli kentucky rebarrel...?  (Read 3602 times)

Offline the Black Spot

Pedersoli kentucky rebarrel...?
« on: May 30, 2014, 09:47:31 AM »
Are there any after market barrels that will fit a pedersoli kentucky ?
Our state regs say max cal for squirrel is .40 which is also min cal for deer.
My shots would be no longer than 50 yds. Before i drop shillings on another rifle i thought i would check into a rebarrel. Thanks in advance.

Online Bigsmoke

Re: Pedersoli kentucky rebarrel...?
« Reply #1 on: May 30, 2014, 10:49:28 AM »
Not aware of anything specifically for that rifle.
But, if you were to contact Richard Beauchamp he might be able to line up a breech plug for it and whatever else it would take to hang it into place.  Then get a barrel from which ever barrel maker you like in the size and caliber you are after then have a gunsmith cut it to length and tap the barrel for whatever size threads Pedersoli uses, put it all together and viola, there you are.  Not as easy as a drop in, but an effective work around.
Have fun with the project.
John
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline gunmaker

Re: Pedersoli kentucky rebarrel...?
« Reply #2 on: May 30, 2014, 07:59:02 PM »
I've re-barreled those guns.  Not tooo hard.  But not a "drop-in" deal.  Get a bbl. from a supplier, most are 42" the Peder's are  7/8" X 39" as I remember.  Have bbl. cut off & thread for that metric thd. plug.  Put the screw in lugs on bottom, add sites & drum/vent  --bang-bang....Tom
Member#2184, 11-1-'12

Online Bigsmoke

Re: Pedersoli kentucky rebarrel...?
« Reply #3 on: May 30, 2014, 08:19:02 PM »
Right.  And the reason to get the additional parts for hanging the barrel in there is so you can then have one gun and two barrels which you can switch out to your preference.
John
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline the Black Spot

Re: Pedersoli kentucky rebarrel...?
« Reply #4 on: May 31, 2014, 09:48:38 AM »
Any idea of the cost involved with this project? Thanks for the info

Offline gunmaker

Re: Pedersoli kentucky rebarrel...?
« Reply #5 on: May 31, 2014, 11:03:18 AM »
Somewhere around 200 bucks for all the parts...more or less
Member#2184, 11-1-'12

Online Rob DiStefano

Re: Pedersoli kentucky rebarrel...?
« Reply #6 on: June 01, 2014, 08:23:10 AM »
lotsa hassles, time and dollar$.  i'd leave it be for what it is and get a new stick ... double the fun.  ;)

Offline the Black Spot

Re: Pedersoli kentucky rebarrel...?
« Reply #7 on: June 02, 2014, 07:55:20 AM »
Thanks all for the tips.

Offline the Black Spot

Re: Pedersoli kentucky rebarrel...?
« Reply #8 on: June 04, 2014, 09:17:45 AM »
Well, did some checking. My local bp smith said if i want a squirrel rifle just get pedersoli kentucky barrel in .32 and then you can swap barrels for what game you're after.
Did some more checking and cant find a source for these barrels, anyone know who might carry them? Thx

Offline the Black Spot

Re: Pedersoli kentucky rebarrel...?
« Reply #9 on: June 04, 2014, 02:09:54 PM »
Found that TOTW has  colerain barrels that might work