Welcome to the TMA - the Traditional Muzzleloading Association
The TMA is always free to access: totally non-profit and therefore no nagging for your money, no sponsors means no endless array of ads to wade through, and no "membership fees" ever required. Brought to you by traditional muzzleloaders with decades of wisdom in weaponry, accoutrements, and along with 18th and 19th century history knowledge of those times during the birth our nation, the United States of America.

* The TMA is seeking another Webmaster Admin - please click HERE to learn more *

Author Topic: .32 cal Crocket  (Read 18766 times)

Offline chuckpa

.32 cal Crocket
« on: August 31, 2008, 09:12:46 PM »
I have been thinking about buying a Traditions .32 cal Crocket model rifle. I would like to hear comments from those who have had experience with this rifle.
Thanks
Chuck
Chuck Beasley
member # 350
valid until 6/1/2009

Offline butterchurn

(No subject)
« Reply #1 on: August 31, 2008, 09:13:51 PM »
I have never shot one, but I've heard people like them.
Butterchurn
Member # 249
Exp. 07/12/10

Set your course by the stars, not by the lights of every passing ship.
General Omar N. Bradley

david32cal

  • Guest
(No subject)
« Reply #2 on: August 31, 2008, 09:19:05 PM »
have owned a couple of them,both were very accurate.

wwpete52

  • Guest
(No subject)
« Reply #3 on: September 01, 2008, 01:20:07 AM »
It's probably the best rifle that traditions makes actually.  I like mine. It's a lot of fun!

Offline snake eyes

(No subject)
« Reply #4 on: September 01, 2008, 05:38:54 AM »
Chuckpa,
             I have had one for 7/8 years. Find it to be very accurate.
Great squirrel shooter! I had a little bit of a cleaning problem at first but not a problem after you get a few rounds thru it.
snake-eyes :shake
Erin Go Bragh
TMA Co -Founder & Charter member #10 to   7/1/2019
Ohio TMA State Rep[/color]
Life member: NAHC
Life member: NRA
Member: Columbus M/L GC

"If you come to a fork in the road....take it!"
    Yogi Berra

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • Total likes: 0
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
(No subject)
« Reply #5 on: September 01, 2008, 09:03:01 AM »
I like the gun they look good and it's a tackdriver. They are a good gun for yung folks to start with. I have one for sale.PM me if you want.
Minnesota TMA State Representative

Member #247

Offline nobber

  • TMA Council
  • ****
  • Posts: 810
  • Total likes: 10
  • TMA: Contributing Member, #250, expiration date; 1/22/2028
(No subject)
« Reply #6 on: September 02, 2008, 01:23:43 PM »
My lil crockett is a tack driver, I only wish it came in brown instead of the blue. It is a nice light weight gun for a weekend squirrel trek and looks quite smart also. My only issue with it was the sights front and rear both had very sharp edges and corners on them I musta cut myself 50 times before I finally took a file after them. I made a small shooting pouch for it out of an old work boot and it holds everything I need for about 50 rounds in it. When I go on  weekend trek I sometimes take my 62 smoothbore and tie my crocket to my pack that way I can shoot whatever I want and the weight of it isn't to overbearing for the advantage of a second gun.

eric davis
NRA Life Member
NAHC Life Member
DU Life Member
NWTF Sponsor Member
Pheasants Forever Sponsor Member
NMLRA National Range Officer and Instructor
Vice President/BoD Pokagon Longrifles
BoD/ The Traditonal Muzzleloading Association #250

Offline Minnesota Mike

(No subject)
« Reply #7 on: September 02, 2008, 03:33:44 PM »
Quote from: "nobber"
I only wish it came in brown instead of the blue.

Just rough it up with some steel wool and let it sit outside for a month . . . should turn all kinds of brown for you . . .  :shock:

r/
MM
TMA number #269.
Expiration Date Oct 2010.

wwpete52

  • Guest
(No subject)
« Reply #8 on: September 03, 2008, 03:55:52 AM »
Quote from: "nobber"
My lil crockett is a tack driver, I only wish it came in brown instead of the blue. It is a nice light weight gun for a weekend squirrel trek and looks quite smart also. My only issue with it was the sights front and rear both had very sharp edges and corners on them I musta cut myself 50 times before I finally took a file after them. I made a small shooting pouch for it out of an old work boot and it holds everything I need for about 50 rounds in it. When I go on  weekend trek I sometimes take my 62 smoothbore and tie my crocket to my pack that way I can shoot whatever I want and the weight of it isn't to overbearing for the advantage of a second gun.

eric davis

Eric, if you want it browned check this out:
http://www.store.laurelmountainforge.co ... cts_id=186

Mountain Laurel barrel brown is the best and easiest browning solution available.  I've used many different brands. This has them all beat.

Offline Fletcher

(No subject)
« Reply #9 on: September 05, 2008, 06:23:45 PM »
My shoots great and needed very little 'tuning' out of the box.  The only problem is they are a bear to clean since the caliber is so small and it takes a reely small patch to clean it.

I actually use a .32 cal rag mop on a .22 cal cleaning rod to swab it out.  Then I have a small brass rod with a .32 cal BP jag to clean dry it out.

I hold it in a vise with leather pads held in a towel so it does not move around.

I cast my own RB and it makes it 'cheap' to shoot.
Fletcher the Arrow Maker
Montana TMA State Representative
TMA Charter Member #143 exp 11/4/18
NRA Training Counselor
BSA National Camp School Director -
Shooting Sports
NRA Life Member
Flathead Valley Muzzleloaders

Offline chuckpa

(No subject)
« Reply #10 on: September 05, 2008, 10:21:40 PM »
Thanks for that information fletcher. I just completed a deal with Roaddog and I would like some information on the loads that you fellows use in this tack driver.
Thanks
Chuck
Chuck Beasley
member # 350
valid until 6/1/2009

Offline snake eyes

(No subject)
« Reply #11 on: September 06, 2008, 12:47:32 AM »
chuckpa,
             I use a .310 PRB with 25grns 3fff goex powder.Has worked
well for me. Good luck with yours.
snake-eyes :shake
Erin Go Bragh
TMA Co -Founder & Charter member #10 to   7/1/2019
Ohio TMA State Rep[/color]
Life member: NAHC
Life member: NRA
Member: Columbus M/L GC

"If you come to a fork in the road....take it!"
    Yogi Berra

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • Total likes: 0
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
(No subject)
« Reply #12 on: September 06, 2008, 05:37:23 AM »
Chuckpa yep 25 grains of fff, # 15 pach and your set to take them squirrels right out of the trees at 30 yards.
Minnesota TMA State Representative

Member #247

Offline snake eyes

(No subject)
« Reply #13 on: September 06, 2008, 08:26:23 AM »
Quote from: "Roaddog"
Chuckpa yep 25 grains of fff, # 15 pach and your set to take them squirrels right out of the trees at 30 yards.
chuckpa,
       .015 patch is what I use also. However,I have used .32cal
Buffalo Bullet Ball-ets with at least the same,if not better than
the PRB,results.Ball-ets do not require a patch.i.e. powder,
ball-et and you are loaded.Great when squirrel hunting.
snake-eyes :shake
Erin Go Bragh
TMA Co -Founder & Charter member #10 to   7/1/2019
Ohio TMA State Rep[/color]
Life member: NAHC
Life member: NRA
Member: Columbus M/L GC

"If you come to a fork in the road....take it!"
    Yogi Berra

Offline Roaddog

  • TMA Forum Member
  • ***
  • Posts: 1580
  • Total likes: 0
  • TMA Member: TMA Paid Member # 247 Expires 3/15 / 2019
(No subject)
« Reply #14 on: September 06, 2008, 01:35:58 PM »
I'll give that one a try.I have looked for maxie ball mold and no luck. I never thought of buffalo bullets. Thanks for the heds up.
Minnesota TMA State Representative

Member #247