Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



« previous next »
Pages: [1]

Author Topic: Colt Walker nipples  (Read 1428 times)

Offline Greg

  • TMA Forum Member
  • ***
  • Posts: 15
Colt Walker nipples
« on: July 12, 2009, 05:16:41 PM »
I have a Colt Walker problem. Using #10 caps the hammer falls just shy of the cap. If I back each nipple out about 1/4 turn it pops the caps, but I'm not comfortable with that solution. Should I try #11 caps or replace the nipples?
Logged
Greg Hall
TMA Member #416
Expires Feb. 2012


"He who knows best knows how little he knows".
Thomas Jefferson

Offline FG1

  • TMA Contributing Member
  • ***
  • Posts: 1036
(No subject)
« Reply #1 on: July 12, 2009, 06:37:19 PM »
Tube on nipples are too short and need replaced . Dixie would have them.
Logged
NRA Life Member

Online Bigsmoke

  • TMA Contributing Member
  • ***
  • Posts: 4134
  • TMA: Charter Member #150
(No subject)
« Reply #2 on: July 12, 2009, 10:00:46 PM »
Ditto that.  
However, be sure of what thread size the nipples are before you order them.  Some are 1/4-28 standard rifle nipples, some are 6 - 1mm CVA rifle nipples.  I seem to recall that there was one other size used on them, but am not so sure right now.  Good luck.
Logged
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest Up to God.

BigSmoke - John Shorb
TMA Charter Member #150  
NRA - Life
Coeur d'Alene Muzzleloaders - Life

Offline Uncle Russ

  • TMA Contributing Member
  • ***
  • Posts: 7337
  • TMA Founder. Walk softly & carry a big Smoothbore!
  • TMA Member: Founder / Charter Member #004
  • Location: Columbia Basin, Washington State
(No subject)
« Reply #3 on: July 12, 2009, 10:21:42 PM »
A quick glance at the "Nipple size chart" that I posted some time back on the Caplock forum, it seems the size is 6.1......
http://www.traditionalmuzzleloadingasso ... php?t=9177

Although I used to own a Walker, and wish I still did, I can't remember what the nipple was on the gun.
I have heard from many others the recommendation to stay with the #10 caps on this gun, apparently they are much less of a "hassle" than trying to get a #11 to work properly...but that seems to hold true with any C&B Revolver.

Uncle Russ....
Logged
It's the many things we don't do that totally sets us apart.
TMA Co-Founder / Charter Member# 4

Offline FG1

  • TMA Contributing Member
  • ***
  • Posts: 1036
(No subject)
« Reply #4 on: July 13, 2009, 11:44:40 AM »
Heres a place for parts  :)

http://vtigunparts.com/
Logged
NRA Life Member
Pages: [1]
« previous next »