Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Dressing A Worn Flint  (Read 1387 times)

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Dressing A Worn Flint
« on: November 11, 2020, 05:13:08 PM »
I made one of these tools in the link below this morning... (I used 1/4" Aluminum rod - but plan on getting myself a solid brass rod) to make a few more just to have on hand... see link below

https://svartkrutt.net/articles/vis.php?id=29

This thing works great for dressing old worn flints I had laying around in the workshop. Even works on "chert flints"

I clamped my flints I re' dressed to the top of my bench vise with an Erwin adjustable slide clamp with a piece of leather under the flint (just enough so the edge of the flint I was knapping stuck out about like it does when in the lock, and the clamp's rubber pad on top the flint). Man was I ever impressed with this simple tool.

I saw ol' Cap-n-Ball (or whatever his name is in his video's) using one - and I figured I just had to try it.  I'll see if I can find that video and post it here as it truly is good information worth sharing.

Here's the video;



 :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Online rollingb

  • TMA BoD
  • ****
  • Posts: 6932
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
Re: Dressing A Worn Flint
« Reply #1 on: November 11, 2020, 06:29:36 PM »
Good video!  :hairy

I have both types of stepped rods, brass and steel.
The steel one also replaces the need for a screwdriver when adjusting/replacing a flint, but is usually used for knapping when there is no main charge in the breech, so an accidental spark can't pose a problem.

My other piece of rod is brass, which works great to knap with, but can't be used to adjust/replace the flint.

"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Online rollingb

  • TMA BoD
  • ****
  • Posts: 6932
  • TMA Founder
  • TMA: Founder
  • TMA Member: TMA Charter Member#6
  • Location: Northwest KS
Re: Dressing A Worn Flint
« Reply #2 on: November 11, 2020, 07:19:29 PM »
You can click on the below link to see what my steel flint knapping tool looks like,.......
https://www.dixiegunworks.com/index/page/product/product_id/3870
"An honest man is worth his weight in gold"
For only $1.25 per-month, you too can help preserve our traditional muzzleloading heritage.
TMA Founder
TMA Charter Member #6

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Dressing A Worn Flint
« Reply #3 on: November 11, 2020, 07:46:33 PM »
Multi tools are the best, cuts down on items carried.  :bl th up

In the field I'd just use my knapping hammer with the flint in the jaws of the lock - but I have to say Rondo, after using this one I made from aluminum - I'm sold on these things for bringing life back to these old flints when the hammer doesn't seem to quite do the trick.  :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Offline doggoner

  • TMA Contributing Member
  • ***
  • Posts: 141
  • TMA: Supporting Member # 687
  • TMA Member: Membership Expiration; 9/2021
Re: Dressing A Worn Flint
« Reply #4 on: November 11, 2020, 08:42:07 PM »
Here are a couple of "tools" you can make if you so desire. Click on the photo to enlarge it.

doggoner

"A hand on a gun is better than a cop on the phone," --Jerry Ellis, Oklahoma State House of Representatives.

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Dressing A Worn Flint
« Reply #5 on: November 12, 2020, 08:56:34 AM »
That forged screwdriver napping awl is interesting.  :bl th up

To be honest, I recall when I first saw these knapping tools like I made yesterday very similar to the "nail" diagram I posted, I truly thought they were a gimmick, and that nothing could replace the little knapping hammer I use... Boy was I wrong!!!  :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Online RobD

  • TMA Admin
  • ****
  • Posts: 3531
  • TMA President & Contributing Member
  • Location: NJ
Re: Dressing A Worn Flint
« Reply #6 on: November 12, 2020, 09:24:17 AM »
How I sharpen a gun flint ...


Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Dressing A Worn Flint
« Reply #7 on: November 12, 2020, 09:36:16 AM »
Yes sir Rob, that's how I always did it (with my little knapping hammer) until yesterday... Now that's not saying I won't still use the knapping hammer for a quick freshening of the flint while in the field (I will)...  :shake
Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska

Offline Winter Hawk

  • TMA Contributing Member
  • ***
  • Posts: 2367
  • Location: Chauncey, OH
Re: Dressing A Worn Flint
« Reply #8 on: November 14, 2020, 11:49:29 PM »
What I use, copied over from the old, defunct Muzzle Loader Mailing List:

 [ Invalid Attachment ]

Mine is made from a nail, and has been in my patch box for 20 years or so.  I'll take a photo of it tomorrow and post it if folks want a better picture.

~Kees~
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2025

Offline Ohio Joe

  • TMA BoD
  • ****
  • Posts: 7660
  • TMA Founder / Charter Member# 8
  • TMA Member: Founder
  • Location: Nebraska
Re: Dressing A Worn Flint
« Reply #9 on: November 18, 2020, 03:00:31 PM »
I'm completely sold on these, Kees - though I still use my little flint dressing knapping hammer in the field ...

I had quite a few flints that my little knapping hammer just would not flake anything more off the edge, but I kept these flints to someday hopefully re' work them for a smaller / lesser throw "Lock" Jaw... The nail idea was perfect for this, and being able to lay the old flint under a piece of leather on top of my bench vise then clamp it to the bench vise with an Erwin wood clamp (the rubber pad on top the flint and leaving the leading edge stick out freely for the striking tool, these little flint dressing rods worked perfect.

Did I mention I'm completely sold on these things?  :laffing :hairy "Yes Sir" 100% sold on them. So even an old bugger like myself can learn something new even after over 40+ years in the game.  :toast   

Chadron Fur Trade Days Rendezvous / "Ol' Candle Snuffer"
"Museum of the Fur Trade" Chadron, Nebraska