I built and repaired wooden boats for forty years. Them's me boney fideys.
There is no "correct" angle of bevel on wood chisels no matter what brand. It's all a compromise. A general guide is to use a fairly low bevel of around 15 deg. for softwoods and a shorter bevel for hardwoods.
You will find as you gain experience and skill that each chisel is an individual as is each piece of wood.
Grind your chisels very slowly on a 6" diameter grinding wheel, keeping the edge cool by frequently dipping it in water. A slow motor of about 1750 rpm and a medium to coarse grit wheel will minimize burning the edge. Hone the edge on a medium grit india stone. That is the combination I used for forty years for grinding and honing my chisels, gouges, slicks, and plane irons. Remember that grinding a chisel is to shape the edge and remove nicks only, honing it on a stone sharpens it.
One other thing, do not waste your money on cheap chisels. Buy the very best you can afford, the difference is as night is to day. I prefer Shark brand made in Eskilstuna, Sweden and Marples Blue Chip, made in England. There are hundreds of brands of excellent chisels, but I like and use those two the most.
The lower the angle, the sharper the edge and the most delicate. Steeper angle grinds are more durable, but a bit duller. If you dont use a mallet the edge will last longer.
Three Hawks
Topic: Bevel angle?? (Read 1350 times)