Your TMA Officers and Board of Directors
Support the TMA! ~ Traditional Muzzleloaders ~ The TMA is here for YOU!
*** JOIN in on the TMA 2024 POSTAL MATCH *** it's FREE for ALL !

For TMA related products, please check out the new TMA Store !

The Flintlock Paper

*** Folk Firearms Collective Videos ***



Author Topic: Plastic nose cap on Uberti Hawken?  (Read 2956 times)

Online Hank in WV

  • TMA Contributing Member
  • ***
  • Posts: 1977
  • TMA Member: Charter Member #65
Re: Plastic nose cap on Uberti Hawken?
« Reply #30 on: January 17, 2022, 09:51:42 PM »
Scott, you might try screwing in a couple of fine wood screws into the stock to use as an anchor for the pewter.
Good luck with the pour. 
Hank in WV
TMA Charter Member #65, exp 4/30/2024
"Much of the social history of the western world over the past three decades has involved replacing what worked with what sounded good. . ." Thomas Sowell

Offline sclearman

  • TMA Forum Member
  • ***
  • Posts: 25
Re: Plastic nose cap on Uberti Hawken?
« Reply #31 on: January 18, 2022, 09:48:59 AM »

I'm thinking doing that and/or possibly a dolls head back into the stock under the barrel.

Online BEAVERMAN

  • TMA Contributing Member
  • ***
  • Posts: 5879
  • TMA: TMA Vice President
  • TMA Member: Charter Member #145
  • Location: Vaughn, WA
Re: Plastic nose cap on Uberti Hawken?
« Reply #32 on: January 19, 2022, 09:28:30 AM »

I'm thinking doing that and/or possibly a dolls head back into the stock under the barrel.

OK I'll bite wth is a dolls head?
Jim Smith
TMA Vice President
Charter Member #145  EXPIRATION 1/21/25
Green River Mountain Men
Peninsula Longrifles
WSMA
U.S.M.C.
BSA                    


"An armed man is a citizen,..an unarmed man is a subject!"

Offline sclearman

  • TMA Forum Member
  • ***
  • Posts: 25
Re: Plastic nose cap on Uberti Hawken?
« Reply #33 on: January 19, 2022, 04:32:01 PM »

I'm thinking doing that and/or possibly a dolls head back into the stock under the barrel.

OK I'll bite wth is a dolls head?

Thats what I've always heard it called in woodworking.  Westly Richards called it a Dolls head on the double shotguns to hold barrels to action closed and give strength. Same thing as the "lollipop tang".  Just a larger section that makes a mechanical lock in the wood.



Online BEAVERMAN

  • TMA Contributing Member
  • ***
  • Posts: 5879
  • TMA: TMA Vice President
  • TMA Member: Charter Member #145
  • Location: Vaughn, WA
Re: Plastic nose cap on Uberti Hawken?
« Reply #34 on: January 19, 2022, 05:35:06 PM »
 :hairy thanks!
Jim Smith
TMA Vice President
Charter Member #145  EXPIRATION 1/21/25
Green River Mountain Men
Peninsula Longrifles
WSMA
U.S.M.C.
BSA                    


"An armed man is a citizen,..an unarmed man is a subject!"

Online Nessmuk

  • TMA BoD
  • ****
  • Posts: 979
  • 2019 thru 2023 Postal Match Director
  • TMA Member: TMA Contributing Member
  • Location: OK
Re: Plastic nose cap on Uberti Hawken?
« Reply #35 on: January 20, 2022, 11:19:50 AM »
Learn something new everyday here.   :bl th up :bl th up
I'm  not  H/C or P/C or even a particularly  good shot but I have a hell of a good time!

Dedicated to the TMA.
Join us, Friend

Offline Winter Hawk

  • TMA Contributing Member
  • ***
  • Posts: 2367
  • Location: Chauncey, OH
Re: Plastic nose cap on Uberti Hawken?
« Reply #36 on: January 22, 2022, 07:50:06 PM »
What Nessmuk said!

~Kees~
NMLRA Life
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone
USN June 1962-Nov. 65, USS Philip, DD-498

Dues paid to 02 Jan. 2025

Offline sclearman

  • TMA Forum Member
  • ***
  • Posts: 25
Re: Plastic nose cap on Uberti Hawken?
« Reply #37 on: January 22, 2022, 08:35:07 PM »
Thank you gentlemen, I"m glad I could offer something you found worthwhile. 
To that end I have some pewter on the way.  TOW was out, but I found some on the auction site, got a pound of it.  Should be enough to do an end cap or two.

Another thing I have found on this rifle, the thimble cap i think it is called is strange.  I have seen from looking at the kits that the entry tube usually has a....skirt? going back over the stock.  I'm not sure what that is called.  On this Uberti, those are 2 seperate pieces.  the tube is one piece held in by a screw through the stock, and the 'skirt' seemed to be glued in place.  I say seemed to be because its not in place any longer.



This poses a problem to me, in that 1.) it's not 'right'  and 2.) I dont like that it's only held by a small lip and epoxy. 

So, I may weld those pieces together and contour to make it as right as I can. I did order one of the parts from TOW and they dont fit, the distance from center of the tube to the skirt edge is too great, there isn't enough stock to make it fit. 

Isn't it fun to work on stuff?  :Doh!